See the following troubleshooting link: http://products.geappliances.com/appliance/gea-support-search-content?contentId=16539 If the fill light flashes, check your house water supply. As soon as the light starts to flash, the washer will initiate a 4 minute lock-out period.
How do you reset a GE washer sensor?
To reset the electronic controls on your washer, shut off the circuit breaker or fuse to the washer or unplug the washer for 2 minutes. For models that have a timer control knob, turn the knob around and back to any position other than final spin for the interrupted cycle. Then, restore power.
Why does my washer say sensing fill?
If the water level seems too low, or if the washer does not fill completely, auto-sensing helps stabilize the amount of water used. The washer senses the size of the load and adds the correct amount of water for the load size. You may notice during a cycle that the wash load is not completely submerged in water.
What does sensing mean on GE washer?
We offer the Precise Fill (may also be called Auto Load Sensing or Adaptive Fill) feature on Top Load washers with an agitator or an infusor. The Precise Fill feature allows the washer to determine the optimum water required to wash the items in the washer basket.
Why is my sensing fill light flashing? – Related Questions
How do you bypass a washing machine sensing?
Here is a simple way to do this:
Let us say you have 2 lbs of clothes.
Add the 2 lbs of clothes in the washtub.
Before commencing the wash cycle, pour 4 lbs of water over the clothes and let water to soak into the fabric.
Start the wash cycle.
You have successfully bypassed water level sensor.
What does sensing fill mean?
SENSING/FILL Light is on
When the Start/Stop button is pressed, and the Water Level knob is set to Auto Sensing, the washer will fill and begin sensing to determine load size and balance.
How long should a washer stay on sensing?
These sensing spins may take 2 to 3 minutes before water is added to the load. The washer will then move the load briefly, pause to allow water to soak into the load, and resume adding water. This process may repeat until the correct amount of water has been added to the load.
How does GE Auto Load sensing work?
How does a sensing washing machine work?
In a washing machine, the Hall Effect sensor is mounted onto a printed circuit board in the electronics panel or onto the frame of the appliance, and a magnet is mounted on the rotating dial. When the dial is turned, the magnet rotates and changes the magnetic field detected by the Hall Effect sensor.
What does sensor wash mean on washing machine?
The Sensor Wash feature senses the incoming water temperature and automatically adjusts the water temperature to the selection you have chosen. This provides you with the best washing and rinsing results. The temperature ranges are obtained by controlling the fill valve.
How do you test a washing machine sensor?
What are the four trouble symptoms of washing machine?
10 Most Common Washing Machine Problems
It Bounces Around.
It’s Noisy.
Clothes Are Getting Ripped.
Improper Or Slow Draining.
My Washing Machine Won’t Spin.
There’s No Water.
The Door Won’t Open.
It’s Smelly.
How do you test a washing machine water sensor?
Inspecting the Tube
Find and inspect the tube that leads from the bottom of the water level switch to the bottom of the tub.
Disconnect the tube from the fittings to which it’s attached at each end.
Inspect the disconnected tube at each end for debris, sediment, and water.
Inspect the tube for kinks and/or holes.
How do I trick my washer to add more water?
Why will my washing machine not fill with water?
You could have a faulty lid or water level switch, or your hot and cold water supplies could be turned off or have kinks in the hoses. A clogged water inlet screen or a malfunctioning electronic control could also be the reason a washer isn’t filling with water.
Can I manually add water to washing machine?
Manually fill the washer with your stored water using a bucket or whatever system you have chosen until the clothing is completely covered with water. Take care not to spill water on the top or over the sides of the drum. This may damage electrical components of the machine. Close the lid and switch the machine on.
Can I connect just cold water to washer?
If you want to connect up a washing machine that uses hot and cold water (and therefore has a hot & cold fill valve) but you only have a cold water supply available, you can use a Y Piece connector to connect it up to a single cold water tap.
Can you put washing liquid straight into the drum?
Dosing directly into the drum helps you to achieve outstanding results. In fact, if you pour the liquid into the drawer, the detergent could get lost in the washing machine pipes before reaching the drum, reducing effectiveness.
Will washing machine spin with no water?
Whenever I choose and start a wash cycle, the drum starts to spin without any water in it, is this normal? Yes!This is normal. This is due to the Automatic Sensing Function in the machine.