The washing machine drains but won’t spin. A displaced or faulty spin switch is the most likely cause. This small switch should be pressed down by the lid when it’s closed. If it isn’t pressed down, your machine may prevent the spin cycle as a safety measure.
How do you fix a GE washer that won’t spin?
How to Fix a GE Washer Not Spinning
This guide covers all major GE washer models, including:
Step 1 – Inspect the lid switch.
Step 2 – Inspect the drive belt.
Step 3 – Inspect the motor coupling.
Step 4 – Inspect the door latch.
Step 5 – Inspect the motor control board.
Step 6 – Inspect the clutch.
Step 7 – Inspect the rotor.
How do I force my GE washer to spin?
If the washer is running, press the “Start/Pause” pad once to interrupt the cycle, then select “Drain and Spin” and press the “Start/Pause” pad again. If the “Stop” pad has been selected and the washer is still full of water, select “Drain and Spin” and then press “Start”.
Why won’t my GE washer agitate or spin?
If the washer is not agitating, you may need to reset your washer motor. If your washer senses a power spike, an unbalanced load or disruption in power, it will send a fault code to the motor and may require the motor to be reset.
Why does my washer drain but not spin? – Related Questions
Is there a reset button on a GE washing machine?
If your washer isn’t working, disconnect it from the power source for one minute.Afterward, plug it back in and quickly lift and lower the lid six times within 12 seconds. And this should reset the motor so you can properly start a cycle.
How do I force my GE washer to drain?
There may be a clog.
Press Start to resume the cycle or you can select Drain & Spin and press Start.
If water remains in the washer, check for a pinched or flattened drain hose.
If you clear a clog, press START to resume your cycle or you can select Drain & Spin and press Start.
How do I make my washing machine spin only?
Will washing machine not spin if too heavy?
An imbalanced drum is a common reason for your machine not spinning. The easiest way to avoid an imbalanced drum is by making sure you don’t overload your washing machine, or if you have one large piece of laundry, add smaller pieces to balance out the load. You may also need to check that your machine is level.
Can you wash without spin?
Your clothes wouldn’t get as your clothes wouldn’t get as clean without the spin cycle that’s how it gets rid of all the dirty water and then it goes into a rinse and then another spin cycle to get rid of the second part of the dirty water so if you want to wash clothes without the spin you will just still have dirty
Should you be able to spin a washing machine drum by hand?
Open the door and give it a good spin by hand. If the belt has come off, there should be less resistance than usual. It may make a different sound. It should also spin around for longer because there’s less resistance – it’s no longer connected to the motor.
Why does my washing machine stop at the spin cycle?
Load Imbalance
The machine will automatically shut down when it senses the load is out of balance to prevent mechanical damage. Turn the washer off and re-balance the load by moving the clothes to an equal distribution. When you close the lid, spinning should resume.
How do I know if my washing machine drum is damaged?
How do you know if the drum has gone in washing machine?
To check, turn the drum back and forth; movement should be smooth and easy with very little resistance or noise. If you can hear or feel grinding then this is confirmation that your washing machine bearings have indeed worn.
Is it worth fixing a washing machine drum?
A relatively new washer may not break down regularly, hence it may be more affordable to repair it. Getting replacement parts for modern machines can be easier than finding components for older models. Washing machine repair is recommended when the repair cost is less than 50 percent of a new machine’s price.
Is it worth repairing a 10 year old washing machine?
Consumer Reports recommends replacing any appliance that’s more than eight years old, unless it’s a high-end model and has a particular appeal to you. Others suggest replacing any top-loading washer manufactured in 1999 or earlier.
Can I still use my washing machine if the bearings have gone?
Can I still use my washing machine if the bearings have gone? Yes, but not for long. Faulty bearings won’t affect the competence of your washer, but they can damage other parts of your appliance like the basket, shaft, outer drum, and some electrical components.
What does a washing machine sound like when the bearings have gone?
When the drum bearings have gone in a washing machine they make a rumbling sound.
What does it sound like when bearings go out on a washer?
Rumbling, very noisy spin
Most often, this is caused by drum bearing failure. One way of testing is by spinning the drum by hand. If it’s noisy, the bearings will need replacement.