If Samsung washing machine displays a UE error, it means that imbalance occurred in the drum, which threatens normal functioning of the device. If you do not take any steps to fix the situation, malfunctions that are more serious are likely to appear with time.
How do you fix UE?
The UE Error Code means you have an unbalanced load.
There are 3 easy fixes.
Check the washer legs. All four should rest evenly on the ground with nothing underneath them.
Redistribute the wash.
Try turning it off and on.
How dO you fix an unbalanced washing machine?
If the washer sits on an uneven surface, its feet will need to be adjusted, or something like a strip of carpet will need to be put under the washer to balance it. Another option is to put rubber vibration absorbers under the washer to balance and reduce shaking when the washer is operating.
Why is my Samsung washer not spinning all the water out?
If your washer doesn’t drain or spin:
Make sure the drain hose is straightened. If you have a kink in the hose, it may restrict any water from draining. Make sure the debris filter is not clogged. If you are able to open and close the door, close it and press START/PAUSE.
Why does my Samsung washing machine says UE? – Related Questions
Why is my washer not spinning but it will drain?
The washing machine drains but won’t spin. A displaced or faulty spin switch is the most likely cause. This small switch should be pressed down by the lid when it’s closed. If it isn’t pressed down, your machine may prevent the spin cycle as a safety measure.
What causes a washing machine not to drain and spin?
If the washer won’t drain or spin, either something is stuck in the washing machine drain hose or pump, or the pump is broken. If a washer won’t drain or spin, the fix is simple if you’re even just a little bit handy with tools.
How do I know if my washing machine drain hose is clogged?
Water Doesn’t Appear or Drain Normally
If the machine turns on and you hear the sound of the water pump, but no actual water appears, then you most likely have a clogged drain hose. The hose can be removed from the back of the machine and be checked for any dirt or dust that may have created a blockage.
How do I know if my drain pump is clogged?
Remove the drain hose by unscrewing the clamps holding it to the pump outlet. Look for blockages inside the hose, says Family Handyman. If you don’t see any, the pump may be blocked or faulty. To check it, you have to disconnect the belt connecting it to the drive motor.
How do you force a washing machine to drain?
How to drain a washer filled with water
Try the spin cycle.
Turn off the power and water supply.
Remove and check the drain hose.
Check to see if it will drain with the help of gravity.
Check your machine’s inner workings.
Check the drain pipe.
Drain manually if needed.
Call a service professional.
How do I manually drain my Samsung washer?
To drain your washer in an emergency, follow these steps:
1 Unplug the washing machine from the power supply.
2 Open the filter-cover.
3 Unscrew the emergency drain cap by turning it to the left.
4 Grip the cap on the end of the emergency drain tube, and then slowly pull it out about 15 cm (about 6 inches).
Does spin cycle drain water?
Spin cycle: your washing machine superpower that removes excess water from your clothes. How? It’s not magic! The motor makes the drum rotate at high speed, while the pump drains the water.
How to reset washing machine?
Can a Samsung washer be reset?
Reset your washing machine
There really isn’t a way to reset the washing machine. What you can do instead is power cycle it: Unplug it (or turn off power at the circuit breaker), wait some time for the electrical charge to clear out of the washer (usually 1 to 5 minutes at most), and then power it up again.
Does unplugging a washer reset it?
On a machine without a reset button, unplugging the washer and then plugging it back in often serves as the means to reset it. Although not usually a button, programmable washing machines might have a reset function or position to clear a program problem.
How do I run a diagnostic on my Samsung washing machine?
Using Smart Check
1 Press and hold Rinse Times + Spin Time simultaneously for 3 seconds to enter the Smart Check mode.
2 The washing machine starts the self-diagnosis procedure and displays an information code if a problem is detected.
3 Run the Samsung Washer app on your mobile device, and tap Smart Check.
How do I reset my Whirlpool washer?
How do you reset a locked washing machine door?
Turning off the machine at the mains should allow the door lock to cool down, and after a few minutes, you’ll be able to open the washing machine door. The interlocks can take some time to release at the end of the cycle, so be patient. The most common cause is water left in the machine. Try running a spin/drain cycle.
How do I manually unlock my Samsung front load washer?
Press the Start/Pause button to unlock the door.
Open the door, then add or remove laundry.
After closing the door, press the Start/Pause button to restart the wash. To change a cycle, you may tap the Pause button and then change the cycle.
Can you manually unlock a washing machine?
The trick is to leave the washing machine disconnected for about five minutes so the lock can cool and release. Then you should be able to open your door. Sometimes the thermal lock will stick. In this case, striking the catch area firmly may let you release it.