Why does my GE washer keep saying bALAnCINg?

“SPIN” light is flashing or “bALAnCINg” (balancing) is in the display (2015 and newer models): This means the washer cannot spin properly. After the wash cycle was complete, the items in the load were no longer evenly distributed enough in the tub to allow the spin out of the water.

How do I fix my GE washer out of balance?

To fix an unbalanced load when spinning in a GE washing machine, pause the cycle, rearrange the clothes in the drum, reduce some clothes if it’s overloaded, and start the cycle again.

How do you reset an unbalanced load on a GE washer?

How to reset GE washers with a timer control knob
  1. Unplug the washer or shut off the washer circuit breaker or fuse.
  2. Turn the timer knob around in a clockwise direction once, bringing it back to any position other than the final spin setting.
  3. Restore the power.

What does bALAnCINg mean on washing machine?

By placing a level on top of the machine, you can adjust the feet of the washer, not the actual floor, to make the machine level. This means that even if the floor itself is not level, you can compensate by adjusting the machine feet to be just right.

Why does my GE washer keep saying bALAnCINg? – Related Questions

How do I get my washer back on balance?

Top-loading washers automatically adjust to level. If something has shifted, you can relevel a top-loading washer by tipping the washer forward, then placing it back on the floor. Front-loading washers level by turning a leg to raise or lower it.

What happens if washing machine is not balanced?

When the load of laundry in the washing machine is unbalanced, it can cause the washer’s basket to move unevenly as it spins and bang against the outer tub.

Can an unbalanced washer be fixed?

If you determine that the washer is unbalanced, the washer’s feet can be adjusted to balance the washer. Depending on the type of washer, it may have feet at the back that self-adjust when the front feet are adjusted.

How much does it cost to fix an unbalanced washer?

Washing machine repair costs by problem
Problem Cost range
Leaking $75 – $200
Won’t drain $85 – $225
Won’t spin $120 – $350
Unbalanced drum $200 – $400

What causes a washing machine to shake violently during spin cycle?

If your washing machine is shaking violently, the culprit may be inside: check if the washer is overloaded or if a bulky item is causing it to become unbalanced. If all is well on the inside, it’s also possible that the washer is unlevel or unbalanced due to improper installation or uneven floors.

Why is my washing machine making a banging noise when spinning?

The most common reason your washer makes banging sounds during the spin cycle is that an unbalanced load has thrown it out of whack. When you put your dirty clothes in your machine, make sure to distribute them evenly in the drum. Heavy items mixed with lighter ones can cause it to spin unevenly.

What do worn bearings sound like on a washing machine?

The most common cause of a washer making a loud noise during the agitation cycle is a worn-out drum bearing or broken drive pulley. These defects usually cause a grinding or rumbling sound when the drum spins.

Is it worth replacing washing machine bearings?

By replacing your worn-out drum bearings with shiny new ones, you’ll essentially be giving your washing machine a new lease of life. You may find that doing this means you’ll get a few more years out of your machine, and it will freshen it up.

Why is my new GE washer so loud?

Both front and top loading washers use a drive belt that connects the washer drum and drive motor to power its spinning. Over time, this rubber belt can become damaged or worn. When it does, your GE washer makes loud noise during spin cycle that sounds like squealing.

Are GE washers supposed to be loud?

Humming, pulsing, or slight buzzing: this noise is similar to an electric can opener. While the GE washer agitates the laundry, it will spin in one direction, pause, then spin in the opposite direction. Any of these types of noises are totally expected and not cause for concern.

How long should a GE washing machine last?

Washing machines, on average, last around 10 years, according to Consumer Reports.

Why is my washing machine suddenly so loud?

The main answer for your question, “why is my washing machine noisy” might include an unbalanced load in a spin cycle, loose drum bearings, a blocked filter or a trapped item such as a coin.

How long should a washing machine last?

The average life of a washing machine ranges from 10 to 13 years, although some brands can manufacture washing machines with an even longer lifespan than the average appliance.

Is it worth repairing a 5 year old washing machine?

Replace: An older machine that breaks down frequently and has needed several repairs in the past few years could keep hurting your wallet. Consider making the switch to a new appliance if your old one is more than 50% through its life expectancy and the cost of a repair would be more than half the cost to replace.

Leave a Comment