Where is the filter on a Whirlpool top load washer?
•
Open the dispenser drawer by pulling on the handle at the base of the washer. This will reveal the drain pump filter.
Where is the filter on my top loader washing machine?
Top Load Washer – Lint / Pump Filters
There are 2 crescent-shaped Fine Mesh plastic lint filters in the bottom of the wash basket under the agitator.
During drain down and spin, the water forces the lint off the bottom of the filters and down the drain.
These filters should never require cleaning or replacement.
Do all Whirlpool washers have a filter?
All whirlpool washers have a filter, and the location of the filter will vary depending on the model of the washer. In most cases, the filter can be found behind the agitator or near the bottom of the washer tub.
Where is the lint trap on a Whirlpool top load washer?
Inside the center agitator: If you have a top-loading washer, inspect the center agitator. The cover may be removable, revealing a lint trap inside. At the end of the drainage hose: A small mesh screen may be fitted onto the end of the hose that drains water out of the machine.
Where is the filter on a Whirlpool top load washer? – Related Questions
Does a Whirlpool top load washer have a filter to clean?
The filter is one of the most important parts of the cleaning process because, without it, your washing machine pump would get clogged easily. By cleaning the filter, you protect your washer from lint, coins, hair, and so many other clog-worthy obstructions from getting through.
How do you clean the trap on a Whirlpool top load washer?
How do you clean a top load washer without an agitator?
When it comes to cleaning the drum of the washer, a washing machine cleaner tablet is the way to go. If you don’t have one, 2 cups of bleach or vinegar also work as a substitute! Grab your tablet, drop it in some water, let it dissolve, then pour it into the drum.
How do I clean the pump filter on my top load washer?
The quickest way to clean out your filter is to remove it from the unit and soak it in hot water, loosening any clog or trapped residue. If the filter cannot be removed, clean it out with brush. Some filters are disposable, so instead of cleaning them you can just throw them away and put a new one in place.
How do you clean the lint trap on a top load washer?
Here’s how to clean it:
If the screen is removable, soak it in hot water for 10 minutes to clear away residue.
If the filter is secured in place, clean lint from it with a soft brush or paper towel.
If the trap is disposable, replace it when it becomes clogged.
How do you clean the lint trap on a Whirlpool washer?
How do you clean a top loading washing machine with agitator filter?
Where is the coin trap on a Whirlpool?
How do you clean a washing machine drain trap?
How do I know if my washing machine drain is clogged?
Start by running your washer through a drain cycle. Observe the washing machine as it pumps water into the hoses and up into the standpipe. If you see water back up and out of the standpipe, your washer’s drain is most likely the issue.
How do I know if my washing machine filter is blocked?
Signs That Your Linter Filter Needs Cleaning
You notice a buildup of laundry detergent or laundry softener residues on clothes.
The clothes do not dry as fast as they usually would.
The clothes don’t dry at all.
You notice a lot of lint falling off when the screen is inside the appliance.
How do I know if my washing machine drain pump is clogged?
Remove the drain hose by unscrewing the clamps holding it to the pump outlet. Look for blockages inside the hose, says Family Handyman. If you don’t see any, the pump may be blocked or faulty. To check it, you have to disconnect the belt connecting it to the drive motor.
How do I clean the pump on my Whirlpool washing machine?