How do you clean the drain pump filter on a Whirlpool washing machine?
How do you unclog a whirlpool drain pump?
Does a Whirlpool washer have a pump filter?
The filter is one of the most important parts of the cleaning process because, without it, your washing machine pump would get clogged easily. By cleaning the filter, you protect your washer from lint, coins, hair, and so many other clog-worthy obstructions from getting through.
Where is the drain pump filter on a Whirlpool washer? – Related Questions
How do you clean the pump filter on a top load Whirlpool washing machine?
How do I clean the pump filter on my top load washer?
Do all washing machines have pump filters?
No pump filter? Some washing machines may not have a filter. In that case the blockage will be in the sump hose, inside the pump itself, or in the drain hose.
Does every washer have a filter pump?
It’s also worth noting that many newer machines, including high-efficiency (HE) models, do not have a filter, instead relying on a self-cleaning filter located in the machine’s pump mechanism.
Where is the filter on a top load washer?
- There are 2 crescent-shaped Fine Mesh plastic lint filters in the bottom of the wash basket under the agitator.
- During drain down and spin, the water forces the lint off the bottom of the filters and down the drain.
- These filters should never require cleaning or replacement.
Does my top load washer have a filter?
“Top loaders tend to have filters on the valves,” said Amber Peabody, Service Manager at Dunnett Inc. The valve filters sift the water going in and out of the pump and hoses. If you do happen to have a removable filter, consult your owner’s manual on how to properly remove it.
Where is the lint trap on a Whirlpool top load washer?
Inside the center agitator: If you have a top-loading washer, inspect the center agitator. The cover may be removable, revealing a lint trap inside. At the end of the drainage hose: A small mesh screen may be fitted onto the end of the hose that drains water out of the machine.
Why does my washing machine not have a filter?
Not all modern washing machines have a filter, however. Some modern machines have self-cleaning pumps, and as a result, the pump doesn’t need to be accessible. If your washing machine doesn’t have a filter but you are experiencing issues, check the manufacturer’s guide that came with the machine.
Where is the coin trap on a Whirlpool top load washer?
In models without an access door, the coin trap is found deeper in the drainage system by the drain pump. There may be a lower access panel or one on the top of your water, but usually, you will need to remove shell of your washer in order to reach it.
Do all washers have coin traps?
Empty the Coin Trap
Many (but not all) washers have a coin trap that catches lost objects like pocket change, jewelry, keys, and lost chapsticks. Your washer’s coin trap will likely have a small hatch or panel that opens to reveal the damp treasure retrieved over the last few months.
How do I get to the coin trap on my top loader washer?
To access the coin trap on these models, you will need to uninstall a lower front access panel or remove the top panel followed by the washer’s control panel and/or front panel. If the coin trap is part of the drain pump, you should be able to remove the filter by rotating it counter-clockwise.
How do I know if my washer has a coin trap?
If your washer has a coin trap, you will see a small, square panel near the floor on the front or side of the machine. Open the door and remove the trap by turning it counterclockwise and pulling. The contents of the trap may surprise you.
Can a coin ruin a washing machine?
Coins, keys, and any other tiny pieces of metal.
Nothing is more commonly found in people’s pockets than keys and coins. Unfortunately, they both can damage your washer or dryer. They can harm the drum, and in rare cases even break the panel for front loaders.
Do all washers have a debris filter?
It’s possible your washing machine does not have a filter at all. Most newer, high-efficiency washers rely on a filter in the pump that self-cleans, meaning that there’s no need for maintenance on your end.