Where is the drain filter on a Whirlpool Cabrio washer?
•
Open the dispenser drawer by pulling on the handle at the base of the washer. This will reveal the drain pump filter.
How do I clean my Whirlpool Cabrio drain filter?
Do Whirlpool Cabrio washers have a filter?
All whirlpool washers have a filter, and the location of the filter will vary depending on the model of the washer. In most cases, the filter can be found behind the agitator or near the bottom of the washer tub. But you always need to check your manufacturer’s manual for the exact location of your model.
How do you clean the pump trap on a Whirlpool Cabrio washer?
Where is the drain filter on a Whirlpool Cabrio washer? – Related Questions
Where is the filter on my Whirlpool top load washer?
Usually, it will be on the bottom right of the washing machine, making access rather easy. Of course, your model may be different so you may need to consult the user’s manual or give your washer a quick look over to find it.
How do you clean a Cabrio top load washer?
How do you clean a pump filter trap?
Where is the pump filter trap on a washing machine?
Where is it? The pump filter is responsible for protecting the pump from a build-up of lint and other obstructions. It should have a retractable pipe at the side so that you can drain the water. The filter is either obvious at the front, or hidden behind the kick-strip at the front of the washing machine (if fitted).
How do you clean a washing machine drain trap?
How do you clean the drain pump filter on a Whirlpool washing machine?
Do top load washers have drain pump filters?
“Some top loaders have no filters,” said Allan Elkin, owner of General Appliance Service in Brewer, Maine. “Front loaders generally have a filter in the drain pump, which is external to the machine. You’d have to take it all apart to get to the filter. You don’t see washing machine filters very often now.”
How do you clean a top load washing machine drain filter?
Step 1: Wipe the Filter and Housing. Open the filter housing and wipe away lint and debris using paper towels.
Step 2: Scrub the Filter. Using a soft-bristle brush, such as an old toothbrush or dish brush, scrub the filter to remove lint and debris that has built up on the filter.
Step 3: Run a Short Wash Cycle.
How do I know if my washing machine drain pump is clogged?
Remove the drain hose by unscrewing the clamps holding it to the pump outlet. Look for blockages inside the hose, says Family Handyman. If you don’t see any, the pump may be blocked or faulty. To check it, you have to disconnect the belt connecting it to the drive motor.
How do I know if my Whirlpool drain pump is bad?
A common complaint is that the water in the washing machine drum will not drain, or that the washing machine has stopped mid-cycle with it still full of water. Another common issue is that the washing machine drum will not spin, or it won’t drain properly.
How do I know if my drain tube is clogged?
To check if you have clogged underground drains, the first place to look is at the bottoms of all the downspouts around the home. When underground drains are clogged, you will often see the water gushing back out of the drainage pipe and spilling out of the adapter seams.
How often should you clear the drain pump on a washing machine?
LG recommends cleaning out the drain pump filter of any lost items and lint buildup on a monthly basis.
What happens if you don’t clean washing machine filter?
A clogged washing machine filter will also develop mold and mildew if it isn’t cleaned regularly. Spores will get into your clothes during the wash and cause allergic reactions if you’re not careful. The machine will have a shorter lifespan without regular cleaning or maintenance.