The recommended flow and pressure for a soft wash system is approximately 6.5 GPM at 150 PSI.
How many gallons does it take to Softwash a house?
Depending on the pump volume for example a 5.5 gallon per minute pump will require up to 5.5 gallons of water to operate. If it takes you one hour to spray your house, you will have used approximately 330 Gallons (5.5*60 minutes) spraying your house for the entire hour at full speed.
What is a soft wash pump?
What is Soft Washing? Soft washing uses a pump sprayer to effectively clean exterior surfaces using a combination of water spray and chemicals. The typical pressure of the sprayer is between 150–300 PSI.
Can you turn a pressure washer into a soft wash?
What size pump do you need for soft washing? – Related Questions
Is soft washing more expensive than pressure washing?
Since professionals use the same machine for both processes, the costs of pressure washing and soft washing are similar, whether you’re bringing in a pro or taking the nozzle into your own hands.
What chemical is used for soft wash?
When professionals think of soft washing roofs and siding, the top cleaning chemical used is a professional-grade 12.5% sodium hypochlorite, or bleach, mixed with water.
Is soft washing the same as pressure washing?
Both soft washing and pressure washing are considered types of power washing. Pressure washing is harsher on surfaces than soft washing. Pressure washing can dislodge deep-rooted contaminants within the surface, making it ideal for hard and porous surfaces like concrete.
What is the difference between soft wash and powerwash?
The main difference between soft washing, power washing, and pressure washing methods is the temperature of the water and PSI. With soft washing, professionals use a less powerful PSI. Power washing blasts water at a high pressure using hot water, but the water used for pressure washing is not heated.
How do I convert my pressure washer to soap?
Locate and Fill Your Detergent Tank With Soap
Then, close up the tank and turn the nozzle to “on”. This is what will draw the soap into the pressure washer pump while you spray. If you forget to flip this toggle switch, your detergent will just sit there as you use the pressure washer.
Do I need a pressure washer to soft wash?
Instead of relying on high pressure to blast away dirt and grime, soft washing uses a combination of low-pressure power washing and cleaning solutions to clean surfaces. These solutions settle in the layers of dirt, eating them away from the inside. The cleaners then use low-pressure power washers to rinse the surface.
What equipment is needed to soft wash a house?
The main things that are needed to soft wash a vinyl house are a ladder, a bleach pump-up sprayer, a pressure washer, outdoor bleach or liquid pool shock, and detergent.
Can you soft wash concrete?
You might think soft washing wouldn’t be able to get the tough job of cleaning a cement driveway done. But along with specialized equipment, it doesn’t just get the job done, but your local Brevard exterior cleaning’s soft washing echnique lasts about 4-6 times longer than the high-pressure method.
Can you use air hose for soft wash?
Yes it’s bleach/SH safe. I used it most of last season and it worked great. Pressure Washer Products even sells it as a soft wash hose now so others must be using it too.
Can you soft wash 3/8 hose?
3/8” is too small for a 5.5. You’ll get pump cycling. 1/2” or larger for a 5.5, and 5/8” or larger for a 7 gpm pump. And remember that you won’t get close to the rated gpm out of a diaphragm pump no matter what hose you use.
What is the safe psi for cleaning with compressed air?
The Occupational Safety and Health Administration (OSHA) standard 29 CFR 1910.242 (b) requires that the nozzle pressure of an air gun used for cleaning purposes remain below 30 pounds per square inch (psi) for all static conditions. In the workplace, pressure to air guns can range from 55 to 160 psi.
How do you effectively soft wash?
Soft washing runs water through a pump and hose with very little pressurization. The pump can also direct the cleaning solution mixture through the hose. Then the hose is directed at the surface being cleaned and the water mixture is sprayed out.
How long does it take to Softwash a house?
How much does it cost to soft wash a house? On average, soft washing costs $275 to $400 for a 1,500-square-foot home with labor costs at $55 to $80 per hour. The project takes two to three hours to complete.
How long should soft wash sit?
Called the ‘dwelling time,’ the soft wash chemical solution needs to sit on the surface for at least 5 minutes; for tougher jobs, the solution typically needs to sit for longer. The longer the solution sits, or dwells on the surface, the more it breaks down the dirt.