What is super sand?

SUPERSAND BOND is a unique mixture of polymer binders and calibrated sand available in Beige and Slate Grey. The installation of SUPERSAND BOND is almost identical to using regular paver joint sand except for the application of water.

What is the best polymeric sand to use?

Below, find picks for the best polymeric sand in a range of categories.
  • BEST OVERALL: DOMINATOR Natural Joint Stabilizing for Pavers.
  • BEST VALUE: SAKRETE Paver Set Joint Sand.
  • UPGRADE PICK: Alliance Gator Maxx G2 Intelligent Polymeric Sand.
  • BEST FOR SMALL PROJECTS: DOMINATOR Joint Stabilizing for Pavers.

What is Nitro sand used for?

GATOR NITRO JOINT SAND is the ideal air cure, permeable jointing material. It is a ready-to-use mixture of calibrated sand and proprietary resin formula which cures when exposed to air, hardening from top to bottom of the joint.

How do you use g2 Super sand?

What is super sand? – Related Questions

How often should you apply polymeric sand?

With regular sand, you should re-sand your pavers at least once in two years. Polymeric sand is usually good for about ten years, so re-sanding costs are saved when using this type of sand. However, this is a very basic estimate, and it actually depends on the conditions faced by your paver, such as weather.

How do you install super sand?

Does polymeric sand harden like concrete?

Polymeric sand hardens quickly

However, you should NEVER install polymeric sand when it is raining! Rain activates the polymers before the sand is in the joints which will ruin your hardscape by producing a haze and adhering sand grains to the surface of the pavers.

How long does polymeric sand need to set before rain?

Most poly sands are considered “rain proof” after one hour, but I wouldn’t bet the bank on that. You really want at least 24 hours of warm, dry air to ensure that the poly sand completely sets. Sustained dampness prior to setting may damage the poly sand to the point it will never set.

Is polymeric sand better than mortar?

You should use polymeric sand over mortar if you want your project to be easy to repair. Mortar is best used when you want your project to last many years without repairs.

How long does it take g2 polymeric sand to harden?

A minimum of 24 hours drying time is required prior to allowing significant foot traffic and 48 hours for vehicular traffic on the paver surface. Polymeric sands are designed to soften and re-heal.

How much paver sand do I need for joints?

The depth being 1-inch, which is equivalent to 1/12 foot, all you really need to do is to divide the total area in square foot by 12. That’s how much sand you need. Find out the total area in square feet, divide by 12, and voila, that’s how much sand you need for a 1-inch layer.

How do you replace polymeric sand between pavers?

To replace sand that has been washed out, simply pour joint sand over the pavers. Next, sweep it into and across the joints using a stiff push broom. Keep the depth of the sand at ¼ inch from the surface of the paver. Afterwards, you can sweep the excess joint sand between pavers and store it again for future use.

Can you add more polymeric sand?

Yes. If you are tired of sand erosion, weeds and ants on your pavers, Techniseal Polymeric Jointing Sand can be used to replace old sand in your joints. Simply remove the old sand completely and apply Techniseal Jointing Sand. This can easily be done by a professional applicator.

What are the cons of polymeric sand?

When installed improperly, polymeric sand will ruin your hardscape. Polymeric Sand has many benefits, however, the biggest drawback is that it can be easy to mess up, especially if you don’t follow the manufacturer’s instructions.

Is there anything better than polymeric sand?

Cement is one of the better alternatives to polymeric sand.

What are the problems with polymeric sand?

Over time, the sand in between paving stones will erode and begin to fade. For the DIY pathway, this means you will need to fix the pathway in as little as 1-2 years, depending on weather changes. Polymeric sand problems lead to the inability to replace any of the paving stones that have eroded or have damage.

Can weeds grow through polymeric sand?

We get daily calls and emails daily from homeowners that have heard of “Polymeric Sand” and that it hardens in the joints and will not allow weeds or insects through the sand and will never wash out. They ask us if the polymeric sand we use is “weed proof”. Unfortunately the answer is no.

Will water drain through polymeric sand?

Polymeric sand, if installed properly, will harden to lock you pavers in place and create a more effective weed and insect deterent while still allowing water to drain freely.

Can you pressure wash polymeric sand?

Can You Pressure Wash It? Yes, you can use a pressure washer but strictly if necessary. If it’s not possible to remove the hardened polymeric sand after a few days washing the surface, then you can bring on the “big guns.” The essential when using pressure wash is not to remove the polymeric sand between the joints.

What happens if polymeric sand gets rained on?

After installation, a hard rain on polymeric sand that has not fully set up could result in polymeric sand all over the top of the pavers. You want to make sure your surface is dry prior to installation and no rain is in the forecast after completing the job for the specified period of time.

Leave a Comment