The Deep Clean option adds a high-concentration soak early in the cycle providing a deep clean for those settled-in stains. These washers are built to last thanks to the Maytag® Commercial Technology we put under the hood, including a 2X Life4 tested drive system.
How do I deep clean my Maytag top load washer?
Method 1: Top-Load
- Set your washer to the hottest and largest setting and start the cycle.
- Add 1 quart of bleach to the water and let the water agitate for a minute so that it mixes well.
- Lift the machine’s lid and let it sit, full of bleach, for an hour.
- After the hour, close the cover and let it run an entire cycle.
What is the deep clean setting on my washer?
Starting in 2019, many top-load washers offer a DeepClean cycle that helps boost cleaning power by up to 67% (compared to the Colors or Whites cycle). With longer agitation and soak times, this cycle helps clean even the most stubborn stains, like dirt or grass.
How do I self clean my Maytag washer?
STEP 1: CLEAN THE WASHER TUB
- Remove any items left in the tub.
- Add an affresh® washing machine cleaner tablet to the bottom of the tub.
- Close the door and select your washer’s cleaning cycle.
- For top load washers, when the cycle ends, run a rinse and spin cycle to clear away any excess cleansers.
What is deep clean on Maytag washer? – Related Questions
How do I clean my Maytag washer without affresh?
Just head to your pantry and get a box of baking soda. Mix 1/4 cup with the same amount of water and add it to the detergent slot of your washing machine. Then, in the drum of the machine, add two cups of white vinegar, suggests Reviewed.com Laundry.
How do I clean the smell out of my Maytag washer?
Here’s how to clean the interior when your Maytag washer smells like mildew:
- Sprinkle ⅓ cup of baking soda inside the empty washer tub and close the door.
- Pour 2 cups of white vinegar in the detergent dispenser.
- Start a regular wash cycle with hot water and run it to completion.
Do you add anything to washer self clean cycle?
To run a Self Clean cycle, make sure the washer is empty, press Self Clean, and then press Start. You don’t need to add any cleaner when running self clean. However, we do recommend using bleach if you already have an existing mold smell (see our guide for details).
What do you use to clean a self cleaning cycle on a washing machine?
When you run your washer’s self-cleaning mode, don’t leave it to its own devices. Add one cup of bleach to the detergent cup before you start the cycle. This is my number one tip for getting rid of nasty smells. It works every time.
How do you run a clean cycle on a washing machine?
Start with an empty and dry washing machine. Set your washer to the cleaning setting or the hottest and largest and setting you have. As the washer fills with water, add 3 or 4 cups of white vinegar. Let the washer start to agitate, then stop the cycle.
What should I use to self clean my washing machine?
How to Clean a Washing Machine
- Step 1: Run a Hot Cycle with Vinegar. Run an empty, regular cycle on hot, using two cups of white vinegar instead of detergent.
- Step 2: Scrub the Inside and Outside of the Washing Machine.
- Step 3: Run a Second Hot Cycle.
How do you deep clean a top load washer?
Take some Chlorine-bleach, pour 1 quart into the water filled washer, and then let it agitate for 1 minute. Afterwards, just let it sit for one hour so it can soak. Finally, run the longest cycle you can from your washing machine settings without adding any detergent. One more time!
How do I clean my washing machine without affresh?
Vinegar and baking soda are amazing natural cleansers and can be used safely in your washing machine. Add a quart of white vinegar and a cup of baking soda to the cleaning mode and run the washer without clothes.
Is bleach or vinegar better to clean washing machine?
If you’re a fan of bleach in the laundry sphere, you’re in luck because it might just be the hardest-working product for sanitizing. If you want to avoid bleach and its harsh chemicals, though, white vinegar is a good alternative with powerful deodorizing and bacteria-killing properties.
Does baking soda and vinegar damage washing machine?
Although vinegar and baking soda shouldn’t be harmful to your washing machine if used in moderate amounts, extreme use can impact some of the coatings on the drive shaft components, which are the parts responsible for switching cycles from agitate to spin.
Can vinegar damage your washing machine?
Vinegar is sometimes used as a fabric softener or for getting rid of stains and odors in laundry. But as with dishwashers, it can damage the rubber seals and hoses in some washing machines to the point of causing leaks.
Can I use vinegar instead of affresh?
As an alternative to a formulated washer tub cleaning product like Affresh, you can clean and sanitize the inside of the tub with a combination of white vinegar and baking soda, or liquid chlorine bleach (be aware that vinegar and bleach should never be used together).
What is Affresh made out of?
Sodium percarbonate: This is commonly known as “oxygen-based bleach” or “oxygen bleach.” It doesn’t contain any chlorine. When sodium percarbonate comes in contact with water, it releases hydrogen peroxide, which can help remove grime and odor-causing residues.
Is Affresh better than bleach?
Using a specifically formulated product comes with some benefits. A product like Affresh has been tested and tweaked to its most effective dose for cleaning a washing machine, unlike regular household bleach. Many reviewers, ourselves included, find it more effective than bleach for cutting through musty washer smells.