What do I do if my Whirlpool washer is off balance?
•
Check that the machine is level across the front, back and sides. A machine that is not level will rock during the spin cycle and cause the machine to be off balance. All four legs should be in firm contact with a solid floor. A carpeted surface can throw this balance off.
How do I fix my washing machine that is off balance?
If something has shifted, you can relevel a top-loading washer by tipping the washer forward, then placing it back on the floor. Front-loading washers level by turning a leg to raise or lower it. You may need to open the front access panel to loosen the lock nuts that control the legs.
Why does my Whirlpool washer shakes violently?
If you’ve noticed your washer shaking a lot, the problem could be an overloaded tub, improper installation or leveling issues. During spin cycles, shaking can usually be attributed to an unbalanced washer.
Can an unbalanced washer be fixed?
If you determine that the washer is unbalanced, the washer’s feet can be adjusted to balance the washer. Depending on the type of washer, it may have feet at the back that self-adjust when the front feet are adjusted.
What do I do if my Whirlpool washer is off balance? – Related Questions
What causes a washing machine to become unbalanced?
A front load washer is much heavier and larger than its top load counterpart. An out-of-balance condition can result from an unlevel machine, or a worn out tub bearing that allows radial play in the wash basket shaft which causes the entire tub and basket assembly to spin wildly out of control.
Why does my washing machine keep unbalancing?
One or more of the suspension springs might be broken. The suspension springs help to absorb the movement of the washer tub. If a suspension spring breaks, the tub might become unbalanced, causing it to shake and vibrate during operation. Inspect the suspension springs to determine if any of the springs are broken.
How much does it cost to fix an unbalanced washing machine?
Washing machine repair costs by problem
Problem
Cost range
Leaking
$75 – $200
Won’t drain
$85 – $225
Won’t spin
$120 – $350
Unbalanced drum
$200 – $400
What happens if the washing machine is not leveled properly?
Washing machines that vibrate, rock, walk, leak, or refuse to spin can often trace their problems back to just one cause: an out-of-level machine. Leveling the washing machine is critical to the proper functioning of the machine and can ward off worse problems, like water supply hoses tearing loose and flooding water.
How do you balance a washing machine by yourself?
Leveling a Washing Machine
By placing a level on top of the machine, you can adjust the feet of the washer, not the actual floor, to make the machine level. This means that even if the floor itself is not level, you can compensate by adjusting the machine feet to be just right.
How do I know if my washer drum is off balance?
If the washing machine is not balanced then it will shake violently during a spin cycle. This will cause water to spill on the floor. You should redistribute the load to solve this issue if the cause is due to too many clothes on a single side of the washer.
How do you reset a washing machine drum?
What happens if top load washing machine becomes off balance?
If the issue is happening every time in your top-load washer, it means something more serious is wrong. The most likely culprit is the suspension rods. These rods help to limit the amount of side to side and front to back movement that happens when a washer enters the spin cycle.
Why is my washing machine making a banging noise when spinning?
The most common reason your washer makes banging sounds during the spin cycle is that an unbalanced load has thrown it out of whack. When you put your dirty clothes in your machine, make sure to distribute them evenly in the drum. Heavy items mixed with lighter ones can cause it to spin unevenly.
How do I stop my washing machine from shaking and making noise?
6 Tips to Stop Washing Machine Vibration
Check that your loads are balanced.
Check the the floor and machine are level.
Ensure You Have a Sturdy Floor.
Check Your Stacking Kit.
Purchase Washing Machine Vibration Pads.
Call in Some Reinforcement.
What does a washing machine sound like when the bearings have gone?
When the drum bearings have gone in a washing machine they make a rumbling sound.
Is it worth fixing a washer?
If your washer needs a major repair such as a new motor, tub or transmission, you’re often better off replacing the washer rather than repairing it; a major repair often costs more than half the price of a replacement washer.
What is the lifespan of a Whirlpool washer?
Washing machines, on average, last around 10 years, according to Consumer Reports. If your washer is reaching the threshold, or it’s been having some problems, here are some signs the end may be near.
What is the average lifespan of a washing machine?
The average life of a washing machine ranges from 10 to 13 years, although some brands can manufacture washing machines with an even longer lifespan than the average appliance.