RAPTOR COLOR
| Code |
Size/Pack |
Color |
| UP4860 |
1.5 fl oz Pouch |
Blue |
| UP4861 |
1.5 fl oz Pouch |
Navy Blue |
| UP4862 |
1.5 fl oz Pouch |
Light Green |
| UP4863 |
1.5 fl oz Pouch |
Green |
Can you color match Raptor liner?
We cannot guarantee 100% colour match. We can mix the computerized formula from the code which should make it very close to your desired colour. *** When mixing 10% colour tint into a 24oz bottle of Raptor, color matching will never be exact due to the volume of Raptor and it’s ability to saturate the tintable Raptor.
What kind of tint do I need for raptor liner?
Tinting RAPTOR
RAPTOR is compatible with any solvent based color, including 2K acrylic solid color and mixed acrylic basecoats, and can be added up to 10% by volume (ask your paint supplier to leave out the binders if possible for best pigment density).
Does Raptor liner need 2 coats?
The recommended RAPTOR application is 2-3 coats with a 60 minute flash time between coats. If further build is needed, it is recommended to carry this out in several applications. For instance, apply the first 2-3 coats, bake or allow 24-hours to dry and then apply another 2-3 coats, etc.
What Colours does Raptor liner come in? – Related Questions
Should I prime Before Raptor liner?
Following scuffing the surface with sandpaper, apply 1-2 coats of acid etch primer as a base coat for the Raptor coating. Allow the primer to dry for 15-20 minutes before applying the Raptor. If you cannot find an acid etch primer, any 2K epoxy primer can be used to prime bare metal. U-POL Inc.
How long does Raptor liner take to harden?
RAPTOR can be baked for 30 minutes @ 140°F. Baking will speed up the initial cure, but it is still recommended that you wait 2-3 days for light usage and 7 days for heavy duty usage.
What PSI should I spray Raptor liner?
30 PSI is typically used for people who are using the bed liner as a finishing tool. If you’re doing your fender flares, or painting your rocker panels, set the pressure lower. If you’re using the product as intended (in your truck bed) we highly recommend that you use the manufacturers recommended pressure of 50 PSI.
Can I spray Raptor liner with a paint gun?
A: If you’re using an HVLP gun, it depends on the texture you want. Once reduced, RAPTOR can generally be applied with a nozzle set from about a 1.4 up to a 2.0. Once it is reduced to the 20% (or slightly more) it is possible to spray it through a smaller nozzle set (1.2 – 1.3).
Will Raptor liner stop rust?
Brunox and Raptor Liner combined in a two-step process will treat the rust stopping any further deterioration and achieve a great looking topcoat that will last for years.
Can you recoat Raptor liner the next day?
Allow RAPTOR™ to flash off 60 minutes in between coats. If there are more than 5 hours in between coats, allow RAPTOR to set overnight, then lightly scuff and apply additional coat(s). Spot prime any areas where bare metal has been exposed.
How much paint do you add to Raptor liner?
RAPTOR is compatible with any urethane based color, including 2K acrylic solid color and mixed acrylic basecoats, and can be added up to 10% by volume.
How much Raptor liner do you need to paint a truck?
The 1 US Gallon Raptor Liner Kit is the industry standard in bed liner coating. Each kit contains four of Raptor and one tin of hardener. Each kit covers approximately 125 square feet, enough to do a full size pick-up truck bed. Compatible with both Raptor Schutz and Professional Vari-Nozzle application guns.
Can you Raptor line over Raptor liner?
Q: I did a coat of raptor liner about 24 hours ago but need to do some touch up work or another coat.? What all do I need too do? You can just go over it.
How much does 4 liters of Raptor liner cover?
Covers approx. 125 sq. ft.
What PSI should I spray Raptor liner?
30 PSI is typically used for people who are using the bed liner as a finishing tool. If you’re doing your fender flares, or painting your rocker panels, set the pressure lower. If you’re using the product as intended (in your truck bed) we highly recommend that you use the manufacturers recommended pressure of 50 PSI.
Can I spray Raptor liner with a paint gun?
A: If you’re using an HVLP gun, it depends on the texture you want. Once reduced, RAPTOR can generally be applied with a nozzle set from about a 1.4 up to a 2.0. Once it is reduced to the 20% (or slightly more) it is possible to spray it through a smaller nozzle set (1.2 – 1.3).
What primer should I use with Raptor liner?
RAPTOR Anti-Corrosive Epoxy Primer is a 2K high performance primer specifically designed to be used under RAPTOR Protective Coating to further extend the protective and anti-corrosive properties of RAPTOR.
What hardener can I use with Raptor liner?
Add 1 part Hardener to 4 parts U-Pol® Urethane Primer or U-Pol® Raptor Bed Liner below. Temp Range 70°-85°F. Liter (33.8 oz). CAUTION – Respiratory Protection is required when painting.
What size air compressor do I need for raptor liner?
Q. What size air compressor do I need to spray RAPTOR? A. A 6 HP compressor that generates 150 PSI line pressure should provide sufficient air supply, but is dependent on the application equipment / gun (Shultz type or gravity feed HVLP) used to apply the RAPTOR.
How do I add color to my Raptor liner?
All you have to do is add our supplied hardener up to the line on the bottle, pour the tint colour in, shake for 2 minutes and shoot. It’s that easy!