If the clutch is worn out, it may prevent the tub from spinning. If the clutch band kit is worn out, replace it. The drive pulley connects to the washer drum and works with the drive belt and motor to rotate the drum. If the drive pulley is worn out, the drive belt might slip off, preventing the washer from spinning.
How do you reset a Kenmore washer that won’t spin?
Why does my washer turn on but not spin?
Here are a few common reasons a washer won’t spin: The washing machine is too full. The load is improperly balanced. The washer itself isn’t balanced correctly.
How do you fix a washer that doesn’t spin?
Redistribute the laundry in the drum.
If you’re wondering how to fix a washing machine that won’t spin, your first order of business should be to rearrange the clothes in the drum. An unbalanced load of laundry is one of the most common causes of an inadequate spin cycle.
What causes my Kenmore washer not to spin? – Related Questions
How do you fix a washer that won’t agitate or spin?
Inspect the drive belt to determine if it is broken or if it is loose on the pulleys. If the drive belt is broken or loose, replace it. The motor coupling connects the motor to the washer transmission. If the washer is overloaded, the motor coupling will fail in order to protect both the motor and transmission.
How do I get my washing machine to spin again?
Why won’t my Kenmore washer spin or agitate?
If the washing machine still does not agitate or spin, the motor control board may be defective. The motor control board is designed to provide power to the washing machine’s motor. If the motor control board is defective, the washing machine may not function at all.
How do you tell if your agitator is broken?
What causes a washing machine to stop agitating?
Broken Agitator
The output shaft of the transmission is splined to the agitator to secure it in place. Over time, some of the components of the agitator can wear down or break with normal usage, causing your washing machine not agitating issue.
How do you reset the agitator on a washing machine?
What causes the agitator not to move in a washing machine?
There are various reasons the agitator may not be working: Something is jammed at the base of the agitator. The lid switch is broken. Your washer’s agitator is broken.
How do you unclog an agitator washing machine?
Turn off water, add in baking soda and vinegar. Dip cleaning cloth in water/baking soda/vinegar mixture, and clean all around the inside and top of the washer. Use Q-tips, a pipe cleaner, or toothbrush to reach the nooks and crannies and remove all the built up gunk. Rinse and scrub the inside of the agitator.
How do I get my agitator unstuck?
Can I use my washer without the agitator?
The lack of an agitator frees up a lot of room in the drum, creating the opportunity to clean larger loads and big comforters. Non-agitator machines use much less water which leads to less waste, cheaper water bills, and “greener” laundry.
How do I know if my washing machine pipe is clogged?
To test this, remove the drain hose attached to the washer and make sure it is clear. An easy way to check that the drain hose is clear is to blow air through it. If nothing is obstructing the drain tube, the problem is most likely at the washing machine pump.
How do you know if your main line is clogged?
Here are a few signs that it’s your main line that’s clogged.
Multiple slow-running drains. If more than one drain is running slow, it’s probably not a coincidence, but an indication that one clog is causing issues for all of them.
Water backing up into other drains.
Gurgling sounds.
Sewage odors coming from the drains.
How do I know if my drain tube is clogged?
There is water coming back out of the pipe which is a dead giveaway. But also there is water pooled up all around it which is also a giveaway. If you see a water stain around your underground drain, that is also a sign that it is clogged.