Description. GLB SuperSonic is a highly effective multi-purpose product that sanitizes, clarifies, prevents algae and shock treats your pool. It is convenient, easy to use and won’t over stabilize your pool water.
How do you use GLB SuperSonic shock?
GLB® SuperSonic
– Add 1 lb. per 10,000 gallons directly to the pool. – For best results, add during the evening hours. – Compatible with chlorine and salt water chlorine sanitizing systems.
What is pool GLB?
GLB® Algimycin® 600 Algaecide
A brilliant one step, triple-action product. Ideal for winterizing pools, this non-foaming algaecide destroys and prevents the regrowth of green and yellow algae, all while increasing water clarity. Plus, it does not require pH adjustment to be effective.
Who owns GLB?
Robert Stern, a microbiologist and GLB®‘s founder, to the industry’s very first non-chlorine shock, GLB® has been pouring science and innovation into our products to make water care effective and easy for all pool owners. And when questions arise, as they always do, we’re here to provide straightforward solutions.
Is GLB super sonic shock? – Related Questions
How do you use a GLB stabilizer?
To obtain a 30 ppm level, add 1 pound of GLB Stabilizer to the pool for each 4,000 gallons of pool water. Add slowly to surface skimmer. Make sure filter is clean with full pressure drop. Recirculate water for at least 6 hours.
What are the 3 types of pools?
By now, you probably know that there are three types of inground pools: fiberglass, vinyl liner, and concrete (also called gunite). Below is a detailed comparison of these three pool types, including the pros and cons of each. You can check out our guide to general pricing for the three pool types.
What does GLB stand for in 3D?
A GLB file (. glb), which stands for “GL Transmission Format Binary file”, is a standardized file format used to share 3D data. Precisely, it can contain information about 3D scenes, models, lighting, materials, node hierarchy and animations.
What programs use GLB files?
You can use Microsoft Paint 3D, Microsoft Remix 3D, and Trimble 3D Warehouse to open a GLB file. Additionally, any program that opens a glTF files can also open GLB files.
What should pool CSI be?
Water that yields a CSI between –0.3 and +0.3 is generally considered “balanced.” The goal is to avoid highly aggressive water that will degrade the pool surface and equipment, while also avoiding scaling water which can deposit scale on pool interiors, pipes, etc.
How high should TDS be in a pool?
Your total dissolved solids, or TDS, value is the measure of the sum of all the substances dissolved in your pool water. Freshwater swimming pools should have a maximum TDS value of around 1,500 to 2,000 ppm. For example, drinking water can have a maximum TDS value of 500 ppm according to the EPA.
What should pH and ORP be in pool?
A slightly basic range of pH from 7.2 to 7.8 will be ideal for chlorine’s ability to disinfect, but pH higher than this will significantly reduce the effectiveness of chlorine.
What to add to pool if ppm is low?
If it is too low, you would add an alkaline material, typically sodium carbonate or sodium bicarbonate. They will usually be labeled pH up or increaser and ph down or decreaser.
How many ppm is considered shocking a pool?
Shocking a pool elevates the free chlorine level to 5-10 ppm. Elevated levels of free chlorine break up combined chlorine. Once your pool has been shocked, the water will be clean, clear, and safe for your family to enjoy.
Why do you put baking soda in pools?
Baking soda, also known as sodium bicarbonate is naturally alkaline, with a pH of 8. When you add baking soda to your pool water, you will raise both the pH and the alkalinity, improving stability and clarity. Many commercial pool products for raising alkalinity utilize baking soda as their main active ingredient.
Can you swim in a pool with 5 ppm chlorine?
The ideal level of free chlorine in the swimming pool is 2 to 4 ppm. 1 to 5 ppm is acceptable and 9 ppm is on the high side. 9 ppm would likely be safe to swim, but could be more of an irritant. Ideally, the level would be alllowed to come down to 5 ppm before swimmers are allowed to swim.
How do you tell if a pool is properly chlorinated?
A clean pool is also one that literally feels clean. In other words, when you put your hand in the water, it should feel wet and nothing else. However, if you’re noticing a slimy feeling on your hand, it means the chlorine isn’t working.
Does high chlorine lower pH?
High chlorine levels decrease the pH of your pool’s water, making it more acidic. The more acidic the water, the higher the likelihood of corrosion. This corrosion can affect metal piping, equipment, and the surface of your pool (tiles, liners, concrete, etc.).
Does adding chlorine raise or lower pH?
Using liquid chlorine raises the pH of the water.
When added to water, liquid chlorine (which has a pH of 13) makes HOCl (hypochlorous acid – the killing form of chlorine) and NaOH (sodium hydroxide), which raises pH.
Does sunlight raise pH in pool?
The fluctuation of the pH of the pool water can have many causes, including: Sunlight accelerates the dissolution of chlorine, increasing the pH. Wind favours the evaporation of the water, which also increases the pH.
Does rain raise or lower pH?
Rain is initially neutral in pH, a perfect 7.0 – but very quickly absorbs low pH contaminants as it falls through the sky. The effect of low pH rain on your pool pH level is usually small, except for heavy rains over a period of days, which can require a need to raise your pH.