How high can you put a washing machine drain hose?
•
In order for the drain hose on your Top Load washer to function properly, the drain must be at least 30″ up from the floor and less than 8 feet high. In order for the drain hose on your Front Load washer to function properly, the drain must be at least 24″ up from the floor and less than 8 feet high.
How tall should a washing machine standpipe be?
The standpipe for the clothes washer must be trapped. The standpipe height should be at least 18 inches (457 mm) and no more than 42 inches above the trap weir.
How do you install a washer outlet box?
Where should a washer outlet be placed?
Electrical hookups for washers and dryers should be placed within 6 feet of the unit. While a minimum height for outlets in a home may very, depending on local building codes, for convenience both outlets should be placed between 34 and 36 inches high.
How high can you put a washing machine drain hose? – Related Questions
What is code for outlets in laundry room?
Section 210.52(F) requires a receptacle outlet to be installed for the laundry area and it must be supplied by a 20-ampere branch circuit in accordance with 210.11(C)(2). However, depending on the location of the receptacle outlet itself, GFCI protection may be required.
How much does it cost to install a washer outlet box?
Most washers require a 120V outlet, which is the standard outlet you’ll find in most homes, while most dryers call for a 240V outlet. Installing a new outlet for either of these types usually costs around $100 to $250, including labor costs.
Does a washer outlet need to be on its own circuit?
But before you make a final choice on appliances consult with your Licensed Electrical Contractor because you may need an electrical upgrade. That beautiful washing machine needs to be on a 120-volt 15 or 20-amp receptacle, on its own circuit. The outlet should be placed out of reach and directly behind the machine.
Does a washing machine outlet have to be GFCI?
The NEC doesn’t require GFCI protection for clothes washing machines specifically, but it does for “Laundry Areas.”
Does a washer box need a vent?
All plumbing fixtures—including washing machines—must be vented. Improperly vented drains can be sluggish and noisy, and can emit hazardous fumes. Properly vented drains allow the P-trap to do its job: prevent sewer gases from escaping into your home.
What is the code for washing machine drain pipe?
According to the Universal Plumbing Code, the standard drain size for a washing machine is 2 inches. The absolute minimum should be about 1 1/2 inches. However, keep in mind that wash load capacities can vary by up to 400% or more depending on the model.
Can a washer and toilet share the same drain?
Your drains are connected – One of the main reasons your toilet gurgles when your washer machine drains is because your washer machine is connected to the toilet drain. This isn’t uncommon. Your washing machine might have been placed in between your toilet and sewer stack.
How far can a washer be from a vent stack?
How far can a vent be from a washing machine? If your washing machine is located in an interior room, the maximum distance the vent pipe can run is around 10 to 15 feet. If the machine is located in an exterior wall, the vent pipe can be vented directly to the outside.
Does a stackable washer and dryer need a dryer vent?
Stackable dryers need to be vented unless they are specially designed ventless models. You can connect a vented dryer to an existing vent on your own. You should allow for approximately 1 to 5 inches of space behind your stacked pair for hoses and ventilation.
How much space do you need to leave behind a washing machine?
Additionally, be mindful to allow for at least six inches of clearance between the appliance and the rear wall for proper ventilation. If you are stacking in a closet, account for at least one inch of space between each side of the appliance and the wall.
Can a washer and sink share a vent?
If you’re joining a washing machine and kitchen sink on the same drain, you may be able to vent them both with a single vent if they are close enough together. If not, you can connect their separate vents before they tie into the main vent stack.
Why do washer dryers not need a vent?
Combo units use condensation drying which gives them the huge benefit of not requiring a vent to expel warm, wet air.
Can you drain a washing machine into a vent pipe?
The best way to vent a washing machine drain pipe is to run it into an existing plumbing vent stack. If this is not possible, you can install a separate vent stack. Either way, it’s important to ensure that the vent stack is properly sized and installed to prevent future problems.