In order for the drain hose on your Front Load washer to function properly, the drain must be at least 24″ up from the floor and less than 8 feet high. GE and Hotpoint Top Load, Front Load and Unitized washers have powerful drain pumps that can pump water vertically as high as 8 feet above the floor.
Can a washing machine drain be too high?
Most washing machines require a standpipe with a height of at least 36 inches. Check your manual to find out the requirements for your particular unit, and ensure your standpipe meets this minimum requirement. Placing your standpipe too low or too high can cause backflow and overflow.
How high can a Whirlpool washer pump water?
Top of standpipe must be at least 39″ (990 mm) high; install no higher than 96″ (2.44 m) from bottom of washer. If you must install higher than 96″ (2.44 m), you will need a sump pump system.
Can a washing machine pump uphill?
Do not pump uphill. If your landscape is slightly higher than the washing machine, place a platform under your machine. If your landscape is uphill from the house, you will need to incorporate another pump into the system.
How high can a washer pump water up? – Related Questions
Can washing machine drain hose go up?
Elevating A Washing Machine Drain Hose
To be safe, you should always raise the drain hose above the level of the washing machine. This will keep any siphoning to a minimum. You may also take other measures to make sure you receive the best drainage possible.
What is the code for washing machine drain pipe?
The plumbing code limits the length of a tail piece to 24 inches. The one exception to this rule is the stand pipe, [washing machine drain]. An auto washer station stand pipe must be at least 18 inches long but no more than 30 inches including off sets.
Can a water pump push water uphill?
Water pumps are powerful devices capable of working hard to pump water, even when going uphill and against gravity.
How do you manually pump uphill water?
How far can a pump push water uphill?
Pumps are limited to about 32 feet of suction head. This is the limit by atmospheric pressure. So, pumps must be located within 32 ft.
Do washing machines have leveling feet?
Check the rear legs: Most washing machines have self-leveling rear legs. Once you get the appliance level from side to side, have a second person help you tip it forward so the rear legs lift off the floor by three or four inches.
Do washing machines automatically adjust water level?
Most washers automatically adjust the water level to the load size; no water level selector is needed (on some models). For best performance, it is recommended to load items in loose heaps evenly around the washplate.
What happens if your washer is not level?
Level the Machine
A machine that is not level will rock during the spin cycle and cause the machine to be off balance. All four legs should be in firm contact with a solid floor. A carpeted surface can throw this balance off. If your washer is located on a pedestal, the problem can be amplified.
What causes washing machine to shake violently?
If your washing machine is shaking violently, the culprit may be inside: check if the washer is overloaded or if a bulky item is causing it to become unbalanced. If all is well on the inside, it’s also possible that the washer is unlevel or unbalanced due to improper installation or uneven floors.
Why is my washer shaking when spinning?
Your washing machine needs to stand level and balanced on its feet to function properly. An unbalanced appliance will vibrate and shake during operation. Try rocking the appliance from side to side or back and forth. If it’s rocking a lot, your flooring or appliance’s feet may be uneven.
Why is my washing machine making a banging noise when spinning?
The most common reason your washer makes banging sounds during the spin cycle is that an unbalanced load has thrown it out of whack. When you put your dirty clothes in your machine, make sure to distribute them evenly in the drum. Heavy items mixed with lighter ones can cause it to spin unevenly.
How do I stop my washing machine from shaking when spinning?
6 Tips to Stop Washing Machine Vibration
Check that your loads are balanced.
Check the the floor and machine are level.
Ensure You Have a Sturdy Floor.
Check Your Stacking Kit.
Purchase Washing Machine Vibration Pads.
Call in Some Reinforcement.
Can washing machine vibrations damage house?
Not only do washers that vibrate too much make a racket but they can also cause structural damage in your home.