To install the socket for a stem-mount caster, drill a hole the size of the socket’s outside diameter straight into the bottom of the leg. Drill about 1⁄ 4 ” deeper than the length of the caster stem. Drive the socket into the drilled hole, then snap the caster into it.
What is a castor socket?
Plastic Caster Sockets
Typically made of nylon, HDPE, or other plastics, plastic caster inserts are injection-molded one-piece components designed to press fit into a hole. Plastic caster sockets will fit in 7/16” and 9/16” round holes, with tubing from 13/16” to 1-1/4”+ OD friction ring stem or 5/16” grip neck stem.
What are the parts of a caster called?
Casters have three basic parts: top plate, fork, and wheel.
How do I know what size casters I need?
One of the primary considerations for choosing casters is the “load,” which refers to how much weight each caster will support. Calculating the load you need for each caster or wheel is simple: just divide the weight of the furniture, equipment, or cargo by the number of casters.
How do you use a caster socket? – Related Questions
How do you measure for caster socket?
Use your ruler to measure the length of the stem from the top of the flared base to the tip of the stem. The caster stem on the right is 7/8″ long.
What is the standard caster size?
Caster Sizes
Most office chairs tend to come standard with 2” to 2.5” wheels. While this is certainly an adequate size, there are some advantages to going with larger wheels and opting for at least a 3” wheel.
How do you choose casters?
The faster you move, the more weight capacity you need in your casters. The caster diameter, width, and material will all affect how much weight your caster can handle at high or low speeds. To determine the required load capacity for each caster on the cart, the maximum cart load is divided by the number of casters.
Are all casters the same size?
Measure the Top Plate of the Caster
Top plates are typically 2-⅜” x 3-⅝”, but they come in many sizes. Before getting a caster, measure the area where you will use it. If you are replacing a caster, measure the existing caster’s top plate to ensure that the replacement will be the same size.
How much weight can 2 inch casters hold?
Heavy duty and double ball bearing: Our 2 inch heavy duty top plate swivel caster wheels can carry 150Lbs, double bearing.
Are bigger casters better?
Caster size is also important. Bigger casters generally mean better maneuverability and smoother movement. Choose the biggest caster that can be used safely for your application. If it’s too big, it’ll raise the center of gravity of your load, increasing the chances of tipping over.
What are the two types of casters?
When considering maneuverability, there are two basic kinds of caster: rigid casters and swivel casters. A rigid caster, also known as a fixed caster, is only able to roll forward and backward. A swivel caster has a raceway that allows the wheel to turn.
What type of casters are best?
Soft casters are best for hard surfaces, like tiles, hardwood, and laminate. Meanwhile, hard casters suit softer floor surfaces. As such, for carpeted flooring, the best option to go with is hard tread casters. Hard casters require less force to roll and move around.
Is positive or negative caster better?
Positive caster is primarily beneficial to the vehicle as it increases the lean of the tire when the vehicle is cornering, while returning it to an upright position when driving straight ahead. Negative Caster – If the line slopes towards the front of the vehicle then the caster is negative.
What happens if you have too much positive caster?
Caster settings are not a primary, direct factor in tire wear. However, excessive positive caster in association with other alignment maladjustments can exacerbate a tire wear issue. For example, a tire wear pattern called feathering can result from a combination of too much caster with incorrect toe settings.
What happens if you have too much negative caster?
In any case, set back may result in a negative caster condition because a wheel, left or right, was pushed back. Result: The wheelbase is now shorter on one side of the vehicle than the other. Too much negative caster may cause the vehicle to wander and cause the steering experience to become mushy.
What happens if caster is off?
If the caster is out of adjustment, it can cause problems in straight line tracking. If the caster is different Page 2 from side to side, the vehicle will pull to the side with the less positive caster.
How do you tell if your caster is off?
When your car travels straight down the road with little handling on your part, that’s due to your caster setting. If you’re driving down a straight path but start pulling to one side, that’s a sign your caster is off.
Does caster affect steering effort?
Variations by degrees of positive or negative camber may be the perfect match for some vehicles. Yet, too little caster will cause the vehicle to “wander” and make it feel unstable at high speeds. Too much caster causes hard steering and can also result in excessive road shock and shimmy.
Can caster affect handling?
Caster Affects Steering and Handling
The same can be said for your vehicle. Modern vehicles run a certain amount of positive caster with the steering axis tilted rearward toward the driver. While caster doesn’t affect tire wear like camber, it does have a big impact on steering and handling.
Will caster cause a car to pull?
So: Camber and caster will cause your vehicle to pull if they’re uneven, but will cause little tire wear, while toe in won’t cause your vehicle to pull, but can cause extremely fast tire wear. This is why your vehicle can pull and not wear out tires, or it can drive perfectly straight and destroy them in a hurry!