Can you clean a washing machine drain pump?
How do I know if my washing machine drain pump is clogged?
Remove the drain hose by unscrewing the clamps holding it to the pump outlet. Look for blockages inside the hose, says Family Handyman. If you don’t see any, the pump may be blocked or faulty. To check it, you have to disconnect the belt connecting it to the drive motor.
Where is the drain pump filter on a Whirlpool top load washer?
Open the dispenser drawer by pulling on the handle at the base of the washer. This will reveal the drain pump filter.
How do you clean the pump filter on a top load Whirlpool washing machine? – Related Questions
How do you clean a top load washing machine drain pump?
- Open your washer’s filter access door. You’re looking for a small, rectangular door on the bottom right-hand corner of your machine.
- Unhook the emergency drain hose.
- Empty the hose.
- Remove the drain pump filter.
- Clean the drain pump filter.
- Replace the drain pump.
Does a Whirlpool top load washer have a filter to clean?
Step 1: Locate the filter
Usually, it will be on the bottom right of the washing machine, making access rather easy. Of course, your model may be different so you may need to consult the user’s manual or give your washer a quick look over to find it.
Do top load washers have drain pump filters?
“Some top loaders have no filters,” said Allan Elkin, owner of General Appliance Service in Brewer, Maine. “Front loaders generally have a filter in the drain pump, which is external to the machine. You’d have to take it all apart to get to the filter. You don’t see washing machine filters very often now.”
Where is the pump filter on a top load washing machine?
- There are 2 crescent-shaped Fine Mesh plastic lint filters in the bottom of the wash basket under the agitator.
- During drain down and spin, the water forces the lint off the bottom of the filters and down the drain.
- These filters should never require cleaning or replacement.
Where is the drain filter on a top load washer?
- In the center agitator.
- In the drum’s top lip.
- Behind a trap door on the front exterior of the machine.
- Near the water pump or at the end of the drainage hose.
Do Whirlpool washers have a filter that needs to be cleaned?
Many of the washing machines have a filter that is easily accessed from the front. You just need to remove the toe panel to get access to the filter.
Can you clean Whirlpool washer without affresh?
If you don’t have affresh® tablets you may be able to use liquid chlorine bleach, but check your use and care guide first. Close the door and select your washer’s cleaning cycle or a normal cycle with hot water setting.
What happens if you don’t clean washer filter?
A clogged washing machine filter will also develop mold and mildew if it isn’t cleaned regularly. Spores will get into your clothes during the wash and cause allergic reactions if you’re not careful. The machine will have a shorter lifespan without regular cleaning or maintenance.
Where is the coin trap on a Whirlpool washer?
Why is my Whirlpool washer not draining completely?
Drain hose kinks or blockages are often responsible for a Whirlpool washer not draining. If the hose is jostled or pushed too closely against the wall a kink can form and restrict the flow of water. Sometimes, the hose can be gently straightened to remove the kink.
How do I get to the coin trap on my top loader washer?
To access the coin trap on these models, you will need to uninstall a lower front access panel or remove the top panel followed by the washer’s control panel and/or front panel. If the coin trap is part of the drain pump, you should be able to remove the filter by rotating it counter-clockwise.
How do you unclog a Whirlpool washer drain hose?
How do I know if my Whirlpool drain pump is bad?
A common complaint is that the water in the washing machine drum will not drain, or that the washing machine has stopped mid-cycle with it still full of water. Another common issue is that the washing machine drum will not spin, or it won’t drain properly.