How do you clean a Maytag top load washer?

Method 1: Top-Load
  1. Set your washer to the hottest and largest setting and start the cycle.
  2. Add 1 quart of bleach to the water and let the water agitate for a minute so that it mixes well.
  3. Lift the machine’s lid and let it sit, full of bleach, for an hour.
  4. After the hour, close the cover and let it run an entire cycle.

How do you clean a Maytag top load washer with an agitator?

You don’t need to clean your agitator separately from the rest of the washer. When you run a cycle to clean the tub, the agitator will be cleaned along with it. If you notice dirt or grime on the agitator, wipe it down with a damp cloth and mild soap or affresh® washing machine cleaning wipes.

How do I clean my Maytag top load washer with vinegar?

Mix 1/4 cup with the same amount of water and add it to the detergent slot of your washing machine. Then, in the drum of the machine, add two cups of white vinegar, suggests Reviewed.com Laundry. Run a normal load and allow the baking soda and vinegar to work their magic.

How do I run a clean cycle on Maytag?

STEP 1: CLEAN THE WASHER TUB
  1. Remove any items left in the tub.
  2. Add an affresh® washing machine cleaner tablet to the bottom of the tub.
  3. Close the door and select your washer’s cleaning cycle.
  4. For top load washers, when the cycle ends, run a rinse and spin cycle to clear away any excess cleansers.

How do you clean a Maytag top load washer? – Related Questions

How do you run a clean cycle on a top load washer?

For a front-load washer, put 2 tablespoons of oxygen bleach or borax and 2 tablespoons of washing soda in the tub of the washing machine. For a top-loading machine, put 1/2 cup of each of the powders into the wash tub. Run the biggest cycle at the hottest temperature or use the “clean tub” setting on the washer.

How do I put myself in clean mode?

How To: Motivate Yourself to Clean
  1. Schedule a party.
  2. Time yourself.
  3. Start small to make the job less daunting.
  4. Start even smaller.
  5. Enlist help if you can.
  6. Crank up the music.
  7. Begin by tossing anything you can into the garbage/recycling.
  8. Thank yourself when you’re finished with a small reward.

How do you run a cleaning cycle?

How do I use the self clean on my Maytag oven?

Can you run a clean washer cycle without affresh?

As an alternative to a formulated washer tub cleaning product like Affresh, you can clean and sanitize the inside of the tub with a combination of white vinegar and baking soda, or liquid chlorine bleach (be aware that vinegar and bleach should never be used together).

What do I put in my washing machine for self-cleaning mode?

First, Run the Washing Machine’s Self-Clean Cycle

Baking soda will help neutralize any “off” smells and give your washing machine a little extra cleaning power. If you’ve noticed mildew or a moldy smell, add bleach during the self-cleaning cycle to get rid of it.

Is bleach or vinegar better to clean washing machine?

If you’re a fan of bleach in the laundry sphere, you’re in luck because it might just be the hardest-working product for sanitizing. If you want to avoid bleach and its harsh chemicals, though, white vinegar is a good alternative with powerful deodorizing and bacteria-killing properties.

Do you add anything to clean washer cycle?

When you run your washer’s self-cleaning mode, don’t leave it to its own devices. Add one cup of bleach to the detergent cup before you start the cycle. This is my number one tip for getting rid of nasty smells. It works every time.

Can vinegar damage your washing machine?

Vinegar is sometimes used as a fabric softener or for getting rid of stains and odors in laundry. But as with dishwashers, it can damage the rubber seals and hoses in some washing machines to the point of causing leaks.

Does vinegar and baking soda damage washing machine?

Although vinegar and baking soda shouldn’t be harmful to your washing machine if used in moderate amounts, extreme use can impact some of the coatings on the drive shaft components, which are the parts responsible for switching cycles from agitate to spin.

How do you clean a top load washer that smells?

Baking Soda & Vinegar Wash
  1. Mix ¼ cup of baking soda with ¼ cup of water and add it to your machine’s detergent container.
  2. Use four cups of plain white (not apple cider) vinegar to a top-load machine or two cups to a front-load model.
  3. Pour the vinegar into the drum.
  4. Run a high-temperature cycle.

Where do I put the white vinegar in the washing machine to clean it?

To clean your clothes with vinegar, put 1/2 cup distilled white vinegar in your washing machine’s detergent compartment. You don’t need to add any other detergents.

How much white vinegar should I use to clean my washing machine?

Add two cups of white vinegar and let the cycle run. (If you have a front load washer, pour the vinegar into the detergent dispenser.) For an extra-clean washing machine, repeat the cycle with a half-cup of baking soda. You’ll also need to hand-wash the top portion of the agitator and basin above the water line.

How do you clean a top loader?

How to Clean a Top Load Washer: 5 Tips From the Experts
  1. Scrub Clean the Inside and Outside.
  2. Run a Cycle on Hot Water Without Detergent.
  3. Clean the Rubber Seals and Filter.
  4. Use Bleach as a Cleaning Agent.
  5. Leave the Top Open When Not in Use.

Leave a Comment