Some washing machines and other forms of technology come with dedicated reset buttons; however, GE does not build these buttons into its washers. You will need to manually reset the washer by disconnecting the power and then plugging it back in or turning the power back on.
How do you unlock the control panel on a GE washer?
You press and hold the Lock button for 3 seconds to use the feature. A sound is made to indicate the Lock/Unlock status. The Control Lock icon on the display will light up when the feature is on.
How do I manually reset my washing machine?
If you see no change, you can try a Master Reset. This will reset all of the onboard componentry and is often successfully used by appliance technicians. Open and close the door of the washing machine 6 times within 12 seconds. Then, run the rinse/spin cycle without clothing to see if your problems are resolved.
How do you diagnose washer control and program problems?
How to Diagnose Washing Machine Control and Program Problems
What You Will Need:
Switch Off Your Appliance.
Check 1 – Turning The Machine On.
Check 2 – Recognise That It Is Filled With Water.
Check 3 – Heating The Water & Proceed With Wash Cycle.
Check 4 – Drain The Water & Proceed With Rinse Cycle.
How do I reset my GE washer control board? – Related Questions
How do I reset the control panel on my washing machine?
To reset the electronic controls on your washer, shut off the circuit breaker or fuse to the washer or unplug the washer for 2 minutes. For models that have a timer control knob, turn the knob around and back to any position other than final spin for the interrupted cycle. Then, restore power.
How do you test a washing machine control board?
How to test a washing machine control board
Locate the control board in your washer (usually behind the control panel in most washers)
Use a multimeter and check for continuity between the terminals on the control board.
If you see continuity, then the control board may not be the problem.
How do you run a diagnostic test on a washing machine?
How do you put a washing machine in self test diagnostic mode?
What is the most common problem with washing machine?
10 Common Washing Machine Problems and Solutions
Washing Machine is Leaking.
Washing Machine Is Noisy.
Washing Machine Moves Around.
Washing Machine Won’t Spin.
Washing Machine Won’t Fill with Water.
Washer Door Doesn’t Open.
Washer Won’t Drain / Washer Is Clogged.
Washer Is Smelly.
What is the first step of troubleshooting the malfunctioning washing machine?
A first step when troubleshooting any appliance is to confirm that it’s drawing power. If your washing machine isn’t showing any signs of life, check that the machine is plugged in. You can also test the outlet with another appliance, such as a phone charger.
What is the first thing you should do when troubleshooting any malfunction?
Maintenance troubleshooting usually follows a systematic, four-step approach; identify the problem, plan a response, test the solution, and resolve the problem. Steps one to three are often repeated multiple times before a resolution is reached.
How do I know if my washing machine fuse is blown?
Your machine may have a special fuse located inside the control panel. Unplug the washer, then remove the couple screws on the dashboard to access the panel. A blown fuse will be black in color and must be replaced.
Is it worth repairing a 5 year old washing machine?
Replace: An older machine that breaks down frequently and has needed several repairs in the past few years could keep hurting your wallet. Consider making the switch to a new appliance if your old one is more than 50% through its life expectancy and the cost of a repair would be more than half the cost to replace.
How long will a GE washer last?
Washing machines, on average, last around 10 years, according to Consumer Reports.
What is the longest average lifespan of a washing machine?
The average life of a washing machine ranges from 10 to 13 years, although some brands can manufacture washing machines with an even longer lifespan than the average appliance. So, while you are on the hunt for your new washing machine, you won’t have to wonder “how long should a washing machine last” anymore.
Are 10 year old washers worth fixing?
Consumer Reports recommends replacing any appliance that’s more than eight years old, unless it’s a high-end model and has a particular appeal to you. Others suggest replacing any top-loading washer manufactured in 1999 or earlier.
Why older washers are better?
Older machines are heavier and were built to last. Because they were constructed with greater quality materials, they typically have a much longer lifespan than the new washers built today.