How do I put my Kenmore washer in diagnostic mode?
- With the washer empty, close the door.
- Push “control/on” or “Start”
- Select “Drain/Spin”
- Select “No Spin” by pressing SPIN SPEED touchpad.
- Push “PREWASH” option four times within 5 seconds. (If there is no PREWASH option, press RINSE HOLD 4 times in 5 seconds.)
- C:00 should light up and begin the diagnostic.
How do I reset my Kenmore Series 500 washer?
How do I calibrate my Kenmore 500 Series washer?
How do I put my Kenmore 500 series in diagnostic mode? – Related Questions
How do you put a washing machine in diagnostic mode?
Why is my Kenmore Series 500 washer not spinning?
The lid switch is a safety device that prevents the washer from going into spin mode when the lid is open. If the lid switch doesn’t work, the washer won’t spin even when closed. Replace the lid switch with a manufacturer-approved replacement part.
How do you recalibrate a Kenmore washing machine?
Why is my Kenmore washer always off balance?
One or more of the suspension springs might be broken. The suspension springs help to absorb the movement of the washer tub. If a suspension spring breaks, the tub might become unbalanced, causing it to shake and vibrate during operation. Inspect the suspension springs to determine if any of the springs are broken.
How do I calibrate my washing machine drum?
- Remove all laundry or any other contents in the machine.
- Power off, and then power on the washing machine on again.
- Hold down Temp.
- Press START/PAUSE to run the Calibration cycle.
- The drum will rotate clockwise and counterclockwise for about 3 minutes.
What does calibrating a washing machine do?
When you calibrate your Samsung washing machine, you prevent the appliance from vibrating and making a lot of noise. Calibrating your washing machine can be done via the display and takes 3 minutes maximum.
How do I master reset my washing machine?
Solutions. Restart it: If you think it might be a digital problem, try the old reset trick. Turn the washing machine off at the powerpoint for at least 60 seconds, and then turn it back on. With a little luck, the master reset should restart the wash programs.
What are the four trouble symptoms of washing machine?
- It Bounces Around.
- It’s Noisy.
- Clothes Are Getting Ripped.
- Improper Or Slow Draining.
- My Washing Machine Won’t Spin.
- There’s No Water.
- The Door Won’t Open.
- It’s Smelly.
Will a washer rebalance itself?
Top-loading washers automatically adjust to level. If something has shifted, you can relevel a top-loading washer by tipping the washer forward, then placing it back on the floor. Front-loading washers level by turning a leg to raise or lower it.
How do I know if my washer drum is off balance?
If your washing machine is reaching its spin cycle and that is manifesting in it making loud banging noise, then it is likely that the machine is out of balance in some way. When this happens, the tub of the washer will begin to bang against the sides of the washer, creating the noise.
What happens when a washer is off balance?
If the washer is unbalanced, you will likely find that it does not wash or spin as well as it should. An unbalanced washer will also often trigger an error code that will disrupt the washing cycle and potentially render the washer unusable until rebalanced.
What causes a washing machine to become unbalanced?
The suspension springs help to absorb the movement of the washer tub. If a suspension spring breaks, the tub might become unbalanced, causing it to shake and vibrate during operation. Inspect the suspension springs to determine if any of the springs are broken. If a suspension spring is broken, replace it.
How much does it cost to fix an unbalanced washing machine?
| Problem | Cost range |
|---|---|
| Leaking | $75 – $200 |
| Won’t drain | $85 – $225 |
| Won’t spin | $120 – $350 |
| Unbalanced drum | $200 – $400 |
How do you balance a washing machine by yourself?
Leveling a Washing Machine
By placing a level on top of the machine, you can adjust the feet of the washer, not the actual floor, to make the machine level. This means that even if the floor itself is not level, you can compensate by adjusting the machine feet to be just right.
Can an unbalanced washing machine cause damage?
An unbalanced washing machine can experience serious damage during the spin cycle. This is because the drum or the tub of the machine will bang against the inside of the washer. You will end up having to spend a lot more on repairing your machine or replacing it.
What ruins a washing machine?
Metal objects such as coins, keys, and screws can damage the inner drum and outer tub of your washing machine. Gum, tissues, and cash can clog your washer drain. Any of these items that make it inside your dryer are going to cause damage to the inner workings there, too.