To locate the filter on your washing machine, consult the owner’s manual.
Typically, the filter will be located in one of these places:
In the center agitator.
In the drum’s top lip.
Behind a trap door on the front exterior of the machine.
Near the water pump or at the end of the drainage hose.
How do I get the filter out of my Maytag washer?
Push Button or Pull Tab
Open the Water Filter Compartment Door.
Turn the filter counterclockwise, to the left, and pull it straight out.
Where is the lint trap on a Maytag top load washer?
Typically, the washer’s trap is at one of these three spots:
At the end of the washer’s drainage hose.
In the center of the washer’s agitator.
Along the drum’s rim of your washer.
Where is the filter on a top load washer?
Top Load Washer – Lint / Pump Filters
There are 2 crescent-shaped Fine Mesh plastic lint filters in the bottom of the wash basket under the agitator.
During drain down and spin, the water forces the lint off the bottom of the filters and down the drain.
These filters should never require cleaning or replacement.
How do I know if my washing machine has a filter? – Related Questions
Do all top load washing machines have filters?
“Some top loaders have no filters,” said Allan Elkin, owner of General Appliance Service in Brewer, Maine. “Front loaders generally have a filter in the drain pump, which is external to the machine. You’d have to take it all apart to get to the filter. You don’t see washing machine filters very often now.”
How do you clean a Maytag top load washer?
STEP 1: CLEAN THE WASHER TUB
Remove any items left in the tub.
Add an affresh® washing machine cleaner tablet to the bottom of the tub.
Close the door and select your washer’s cleaning cycle.
For top load washers, when the cycle ends, run a rinse and spin cycle to clear away any excess cleansers.
How do I clean the filter on my top load washing machine?
The quickest way to clean out your filter is to remove it from the unit and soak it in hot water, loosening any clog or trapped residue. If the filter cannot be removed, clean it out with brush. Some filters are disposable, so instead of cleaning them you can just throw them away and put a new one in place.
How do I clean the filter on my Whirlpool top load washer?
Do all washers have a washer filter?
Some washing machines may not have a filter. In that case the blockage will be in the sump hose, inside the pump itself, or in the drain hose.
Do high efficiency washers have filters?
High-Efficiency Washers Don’t Have a Lint Filter
Instead, it relies on a self-cleaning pump filter to remove lint from the wash. Still, it’s wise to run an empty wash cycle once a month to flush excess lint from the pump filter.
Why do some washing machines not have filters?
Bear in mind that some washing machine models do not have an external filter because they are in-built in the pump. These advanced models are designed in a way that the filter cleans itself; therefore, you needn’t have to worry about doing any manual work as far as filter maintenance is concerned.
Why does my washing machine not have a filter?
Not all modern washing machines have a filter, however. Some modern machines have self-cleaning pumps, and as a result, the pump doesn’t need to be accessible. If your washing machine doesn’t have a filter but you are experiencing issues, check the manufacturer’s guide that came with the machine.
How do I know if my washing machine filter is blocked?
Signs That Your Linter Filter Needs Cleaning
You notice a buildup of laundry detergent or laundry softener residues on clothes.
The clothes do not dry as fast as they usually would.
The clothes don’t dry at all.
You notice a lot of lint falling off when the screen is inside the appliance.
Where is the drain filter on a Maytag washer?
The drain pump filter is directly behind the drain dispenser drawer. To open the drawer, push down on the drawer’s right side tab and up on the left side tab. This should free the drawer to be completely removed.
How do you clear a clogged washing machine filter?
Where is the lint trap on a washing machine?
Your washer’s lint filter may be within the center agitator of a top-loading washer. Remove the cover and check for a lint trap that can be cleaned. A removable lint screen may also be located along the washer drum’s top rim. Mesh lint traps are also commonly found in washer drain hoses.
How do you tell if your lint trap is clogged?
The Warning Signs and Dangers of Clogged Dryer Vents
It takes longer than usual to dry your clothes.
You notice a burning smell.
Your clothes are hot to the touch at the end of a load.
You can see lint or debris in the dryer hose or around the outside dryer flap.
You haven’t cleaned out your vents in over a year.
How do you open the lint trap on a washing machine?