For LG front load washers, turn the unit on and without touching the selector dial move to the spin speed selection button. Next, press the button until you see your desired spin speed highlighted. Then press the Start button. The unit will drain any excess water before it spins.
Why is my LG washer not spinning and draining?
Unbalanced Load. One of the most common reasons your LG washer won’t drain often results from an unbalanced load. Washing a large or heavy item can cause it to settle on one side of the washer drum. When this happens your LG washer won’t drain or spin properly and water will be left behind.
How do you reset a washer that won’t spin?
Why is my washer not washing but spinning?
If your washer won’t agitate but spins, a broken agitator may be to blame. The agitator is the centerpiece in a top load washer that agitates and moves the clothes through the water during the wash cycle. The output shaft of the transmission is splined to the agitator to secure it in place.
How do I get my LG washer to spin? – Related Questions
What is the most likely cause if a washing machine will not agitate or spin?
A major reason that your washing machine has stopped agitating may be that there’s a fault with the drive belt. The belt could be slipping because it’s loose or it may have snapped completely. If you’re going to fix an issue like this you’ll need to be fairly handy or call a repairperson for help.
How do you fix a washer that won’t spin or agitate?
Inspect the drive belt to determine if it is broken or if it is loose on the pulleys. If the drive belt is broken or loose, replace it. The motor coupling connects the motor to the washer transmission. If the washer is overloaded, the motor coupling will fail in order to protect both the motor and transmission.
How do you reset a washing machine?
What are the four trouble symptoms of washing machine?
10 Most Common Washing Machine Problems
It Bounces Around.
It’s Noisy.
Clothes Are Getting Ripped.
Improper Or Slow Draining.
My Washing Machine Won’t Spin.
There’s No Water.
The Door Won’t Open.
It’s Smelly.
How do I get my washer to work again?
How to Fix a Washing Machine that Won’t Start
Activate the power button.
Test the outlet.
Reset outlet if necessary.
Make sure the power cord is plugged in.
Check if fuses are blown or the circuit breaker is thrown.
See if Delay Start has been pushed.
See if Control Lock has been activated.
How do I know if my washer drain hose is clogged?
Start by running your washer through a drain cycle. Observe the washing machine as it pumps water into the hoses and up into the standpipe. If you see water back up and out of the standpipe, your washer’s drain is most likely the issue.
What will unclog a washing machine drain?
If you don’t feel prepared to manually take apart your laundry unit and use a drain snake to clear dense debris from your clogged washing machine drain, you can also try flushing out your drainage systems with non-caustic home cleaning mixtures, typically made of baking soda, vinegar, and hot water.
How do I know if my drain tube is clogged?
To check if you have clogged underground drains, the first place to look is at the bottoms of all the downspouts around the home. When underground drains are clogged, you will often see the water gushing back out of the drainage pipe and spilling out of the adapter seams.
How do you know if your main water line is clogged?
Here are the symptoms of a home or municipal pipe that’s firmly clogged.
Changes in Water Pressure.
Frequent Debris Coming Out of Fixtures.
Dampness and Wet Spots.
Irregular Lawn Features.
Very High Water Bills.
Poor Maintenance Techniques.
Terrible Odor.
Overflow.
How do I clear a main line blockage?
Steps For How to Clear A Main Sewer Line Clog
Loosen the Drain Pipe Cap (aka Sewer Cleanout Pipe)
Remove Cleanout Cap, Allow Water to Backflow to Opening.
Insert the Snake into the Sewer Line Pipe Opening.
Run the Tool Until All Clogs are Gone.
Clean Up and Replace Sewer Cleanout Cap (Don’t overtighten.)
How do you check for a clogged drain line?
Tell-tale signs that your sewer line is clogged include:
Gurgling sounds. Any gurgling, gargling, and glugging sounds coming from your toilet means you may have a sewer line clog.
Malodorous smells.
Slow-running drains.
Water in strange places.
Sewage in your sink.
How do you clear a clogged water line?
Combine a cup of salt with a cup of baking soda. Pour this mixture into the clogged drain and then add ample boiling hot water. Allow the mixture to sit overnight for up to 10 hours. After a minimum of 8 hours, run more water and let the mixture run through the garbage disposal, pipes, or drain.
What causes a clogged water line?
These clogs usual occur because of a build-up of minerals along the interior of the pipes due to impurities in the municipal water supply. When you start to notice a drop in water pressure in your home, or if water ceases coming out of some taps entirely, you may have water supply line clogs.