Press the POWER button to turn the washing machine off and remove the plug from the outlet. Locate the service panel on the bottom-left corner of the unit and open it. Unclip the drain hose and remove the plug from the drain hose to drain the water remaining inside the wash tub.
How do you force a washer to drain water?
How to drain a washer filled with water
Try the spin cycle.
Turn off the power and water supply.
Remove and check the drain hose.
Check to see if it will drain with the help of gravity.
Check your machine’s inner workings.
Check the drain pipe.
Drain manually if needed.
Call a service professional.
How do I manually drain my LG automatic washing machine?
Drain Your Washer Manually
Turn off the faucet supplying your washer.
Switch off the power at the wall, or unplug the washer.
Open the access panel.
Place a shallow pan next to the access panel, and pull the drain hose out from its clip so that it will drain into the pan.
How do I manually drain my LG top load washer?
Press POWER to turn the washer on.Press the SPECIAL USE key until SPIN ONLY is lit.Press the START/PAUSE button to begin the cycle. The unit should begin a SPIN ONLY cycle and attempt to drain any remaining water that is inside the washer.
How do I get my LG washer to drain? – Related Questions
How do you turn off and drain on an LG top load washer?
If you’d like to perform a drain-only cycle on your LG washer, press the Spin button and Start. After a brief wait, the machine will end the cycle and successfully drain all the water. You can also turn off your washing machine and unplug it from its outlet before locating and opening the service panel.
How do I completely drain my top load washer?
Is there a drain option in washing machine?
A washing machine’s drain function removes water from the tub during the spin cycle. The washer pump forces water from the bottom of the appliance into the drain hose.
Does spin cycle drain water?
Spin cycle: your washing machine superpower that removes excess water from your clothes. How? It’s not magic! The motor makes the drum rotate at high speed, while the pump drains the water.
How do you drain water from a washing machine before moving?
Turn off both the hot and cold valves. To get the remaining water out of the hoses, turn the machine on for a warm wash for about 30 seconds. Then, switch the dial or setting over to spin, which will automatically drain that last bit of water away. Now you can switch off and unplug the machine from the power point.
Do top load washers have a drain trap?
If you have a newer high-efficiency (HE) washer—whether front- or top-loading—the machine doesn’t have a lint trap. Instead, it relies on a self-cleaning pump filter to remove lint from the wash.
Where is the drain filter on a top load washer?
Typically, the filter will be located in one of these places:
In the center agitator.
In the drum’s top lip.
Behind a trap door on the front exterior of the machine.
Near the water pump or at the end of the drainage hose.
Where is the drain plug on a top load washer?
The drain pump may be located behind removable panels in either the front or back of the washing machine, even underneath the appliance, requiring you to tip the machine forward to access it (consult your owner’s manual for instructions). You’ll see a drain hose and inlet hose connected to it with spring clamps.
How do you drain a washing machine for winter storage?
8 steps to winterize your washing machine.
Water supply. Begin by shutting off the water supply to the home.
Disconnect power Cord. Unplug the unit and disconnect the inlet hoses from the water supply.
Drain water out.
Tilt Washer.
Add antifreeze.
Spin cycle.
Remove residual antifreeze.
Unplug Unit.
Do you have to drain a washer before storing?
Residual water or moisture can sit in your washer while in storage, causing mold and rust. Make sure to thoroughly wipe down the machine after it has drained. You should leave the door to the washer open for a minimum of 24 hours before your move to dry out any additional moisture.
How do you drain a washer so it won’t freeze?
Do I need to winterize my washing machine?
IMPORTANT: To avoid damage, install and store washer where it will not freeze. Because some water may stay in hoses, freezing can damage washer. If storing or moving during freezing weather, winterize your washer.
How long can a washer sit unused?
When it starts operating, a washer can sit unused for months or even years, but if it’s stored well, it will do just fine. If it isn’t stored properly, it can start to rust, and if it’s stored for a long time, it will sustain irreversible damage.