Do front load washers have shipping bolts?

All manufacturers ship front loaders with the shipping bolts inserted to avoid internal suspension and structural damage to the washer during transport. Retailers leave the shipping bolts in the front loaders until the unit is delivered to the Consumer.

What happens if you move front load washer without shipping bolts?

Moving a washing machine without transit bolts will run the serious risk of damaging your machine, so we strongly advise against it. Washing machine transit bolts are a vital piece of equipment required to move your washing machine securely. A washing machine is a complex piece of equipment with many moving parts.

Do you need shipping bolts for washer?

Will washer work with shipping bolts?

You need to remove the shipping bolts. If the four shipping bolts of your machine are still attached to the back of the washer, they will cause a loud noise and vibration during the operation of the machine; which can lead to a permanent damage of the washer.

Do front load washers have shipping bolts? – Related Questions

What happens if I dont remove transit bolts from washing machine?

The transit bolts need to be removed when the appliance is being installed. They are designed to hold the drum in a fixed position while being transported. Failure to remove this will void the warranty, so please refer to the appliance manual for additional guidance.

Do washers help keep bolts tight?

Washers distribute the bolt’s pressure over the surface of an object without damaging the surface or the bolt. The washer also ensures that the bolt adheres tightly to the surface to prevent the bolt from loosening over time.

Do you use washers with flange bolts?

Washers. Addition of steel washers to a fastener system is recommended to improve translation of torque input into bolt preload. Washers provide a smooth bearing surface, reducing friction between nut and flange.

What happens if you use washing machine with transit bolts?

The bolts can rip sections off the outer tank, tear through the outer casing and cause massive damaging vibrations to be sent through the room in which the washing machine is installed. In other words, by not doing as instructed you risk major damage to your washing machine.

Do you need a washer with a flange bolt?

It is made of hardened steel. But many times it happens that some nut designs already have washers added, due to which it does not require any other washers. There are many nuts in which we can leave the washers while using them. We can do this because the flange extends the bearing surface.

How do you match a washer to a bolt?


It is important to note that when matching a washer with a screw or a bolt, the diameter of the shaft of the screw or bolt should be matched to the inner diameter of the washer. For example, a ¾-16 bolt should be matched with a ¾ washer.

Are all washing machine shipping bolts the same?

Some brands of washing machines may have shipping bolts that are all the same length, and any shipping bolt can be used in any hole.

What size are shipping bolts on a washing machine?

They are typically 4 to 12 in (100 to 300 mm) in length, although any size is possible as it depends on the type of device being transported. The most common example of transit bolts is the securing of the drum of a washing machine while it is transported from shop to property (or property to property).

Can Home Depot match a bolt?

All you do is bring your nut or bolt from home and check to see which one it threads into properly. Once you get a match, then you know what size nut or bolt to buy!

What is the difference between group A and group B bolts?

1, Group A is composed of those materials that have a tensile strength similar to ASTM A325, and includes ASTM A325/A325M, F1852, A354 Grade BC and A449. Group B is composed of those materials that have a tensile strength similar to ASTM A490, and is composed of ASTM A490/ A490M, F2280 and A354 Grade BD.

How can I tell what size bolt I need?

To measure the diameter of screws and bolts, you measure the distance from the outer thread on one side to the outer thread on the other side. This is called the major diameter and will usually be the proper size of the bolt.

Which bolts Cannot be reused?

Galvanized bolts and F3125 Grade A490 bolts that have been pretensioned may not be reused at all.

How do you know if a bolt is over torqued?

Yielding fasteners are typically brought about by too much torque. An externally threaded fastener which has been over-torqued will generally stretch and “neck down” causing an hourglass shape as pictured below. If your fastener looks like this, it has been over tightened.

How many times can you reuse a bolt?

Previous modifications made to fasteners with paint, lubrication, or other treatments also make them unsuitable for a second application. Used bolts, nuts, washers, and other types of fasteners should not be reused on critical joints or applications, no matter their condition.

Can you use stretch bolts twice?

However, because the tightening procedure does permanently stretch the bolt, there is some risk of breakage if the bolt is reused. And since there is no way to tell how many times a bolt has been reused, it doesn’t make any sense to reused TTY bolts – the risk far outweighs the replacement cost of used bolts.

What happens if a bolt is over tightened?

Everyone who has ever worked with fasteners has accidentally messed one up at some point. One of the most damaging ways to do that is by over-tightening, or over torquing the fastener. This can result in stripping screws, snapping screw heads and damaging pre-tapped threading.

Leave a Comment