Do not plug your washing machine into an extension socket, only ever plug your washing machine into a mains wall socket.
What plug does a washing machine use?
Washer –Washing machines are large appliances that do not require customized electrical hookups, they simply need a 120 volt outlet that can take 3 prongs.
What size outlet do you need for a washing machine?
Washer Receptacle
The 120-volt, 20-amp circuit supplies a receptacle for the washing machine. It is typically wired with 12-gauge, two-wire cable containing a hot wire, a neutral wire, and a ground wire. The receptacle is a 20-amp GFCI receptacle.
What kind of outlet do I need for a washer and dryer?
Regardless of the type of dryer, both require connection to a 240-volt electrical outlet in order to operate. Does your home have the right 240-volt outlet? A 240-volt outlet will provide access to plugs with either three or four prongs.
Can you plug a washing machine into a normal socket? – Related Questions
Do you need a special outlet for a washer and dryer?
Your washing machine should run on a standard 110 outlet. Most dryers will not only require a special outlet and enough power to run them, but a special cord to match. If you don’t have a dryer outlet established and properly wired, call an electrician.
Does a washing machine need its own outlet?
But before you make a final choice on appliances consult with your Licensed Electrical Contractor because you may need an electrical upgrade. That beautiful washing machine needs to be on a 120-volt 15 or 20-amp receptacle, on its own circuit. The outlet should be placed out of reach and directly behind the machine.
Should a washer and dryer be on a GFCI outlet?
GFCI Protection:
210.8(A)(10) – All 125V, 15a and 20a receptacles installed in “Laundry Areas” shall have GFCI protection. The NEC doesn’t require GFCI protection for clothes washing machines specifically, but it does for “Laundry Areas.”
What does a 240-volt outlet look like?
A 240-volt outlet is larger with two vertical side holes, an “L”-shaped hole on top, and a bottom hole that looks like a half circle. Newer four-prong outlets add a ground wire over older three-pronged ones that helps avoid electrical shock. A 240-volt outlet is typically about 4½ inches high and 4½ inches wide.
Do laundry room outlets require 20 amps?
So far, the NEC is very clear that a dedicated 20-ampere branch circuit must be installed for the laundry circuit, if a laundry circuit is required or permitted. In most dwellings, this amounts to the installation of a receptacle for a washing machine.
Can a washer and dryer be on the same outlet?
Your laundry room should have a dedicated circuit of at least 20 amps. If you have a gas dryer, both your washing machine and gas dryer may be plugged into the same outlet. If you have an electric dryer, it will need its own dedicated 20-amp, 220-volt circuit.
What is code for outlets in laundry room?
Section 210.52(F) requires a receptacle outlet to be installed for the laundry area and it must be supplied by a 20-ampere branch circuit in accordance with 210.11(C)(2). However, depending on the location of the receptacle outlet itself, GFCI protection may be required.
How many amps does a washing machine pull?
Most washing machines use between 5 and 15 amps, and connect to a 120 volt outlet.
Do you need a GFCI near a washing machine?
The washing machine outlet itself does not require a GFCI outlet, however any outlet within 6 feet of the outside edge of the sink in laundry rooms require that it be GFCI protected.
How far off the ground should a washing machine outlet box be?
Once you’ve selected the right washing machine outlet box for your situation, it should be installed at a height where the flood level rim (or the top of the drainage outlet) is 32” to 34” above the finished floor.
Can a washing machine be on a 15 amp circuit?
Because of that, all 120V 15 Amp devices are normally designed to work properly in a 120V 15 Amp or 120V 20 Amp circuit. This is true for appliances like a washing machine but even for something as small as a cell phone charger that actually uses < 1 Amp.
Will a washing machine trip a GFCI outlet?
To narrow this problem down, there are three places that could be causing the GFCI to trip, a malfunction in the washing machine, a problem with the downstream wiring (aka load side of the GFCI), or the GFCI outlet itself.
Why does my washing machine keep tripping the outlet?
The start/stop switch is defective
The electric switch for starting your washing machine is equipped with a connection that has lugs or connectors. This may be defective due to the electric current (overheating) and can end up with a short circuit. In such cases, the switch may then trip the circuit breaker.
Why does my washing machine keep tripping my electric?
There are multiple causes which can result in a washing machine tripping the electrics, such as the motor, the heater, the supressor, a wire shorting out, or water leaking onto an electric part. It can therefore be difficult to determine exactly which cause is responsible without professional help.