Washing machines spin the drum more slowly during the washing cycle and faster while draining. This is perfectly normal as the slower spin speed will ensure the load gets mixed and cleaned properly.
Why is my Whirlpool washer not spinning properly?
The most common reason a Whirlpool top-loader washer stops spinning is a faulty lid switch. The lid switch is a safety measure that prevents the washer from spinning while the lid is open.
How do you reset the spin cycle on a Whirlpool washer?
How do you fix a low flow on a Whirlpool washer?
LF in the display
Check the water inlet hoses to be sure they are not clogged or kinked. You may also need to check the screens on the washer water inlet valve. This means shutting off the water supply, and disconnecting the water inlet hoses from the washer.
Why is my washing machine spinning slow? – Related Questions
What are the most common problems on a Whirlpool washing machine?
Here are seven of the most common problems on a Whirlpool washing machine and potential fixes for them.
Washer Making Unusual Noises.
Washer Won’t Start.
Washer Lid Won’t Lock.
LD Error Code Appears.
Washer Leaves Deposits on Dark Clothes.
Washer Has a Burned Plastic Odor.
Rust Spots Appear on Washer Lid.
Why is my flow rate so low?
Clogged Pipes or Fixtures – If only one or a few fixtures in the house are experiencing problems, there may be a plumbing-related issue: clogged pipes. Mineral buildup in pipes, showerheads, or inside your taps can restrict water flow, resulting in lower flow rates.
How do I get my Whirlpool washer to fill with more water?
If you would like to add the maximum amount of water to your wash cycle, turn the Water Level knob to the Deep Water Wash setting. NOTE: Expect longer cycle times due to extended fill times when using the Deep Water Wash option.
What do I do if my washer has low water pressure?
If concerned about very low water pressure, ask your local water authority what the water pressure is to your home. If they say it is 1 bar or over then modern washing machines should work. If not you would need to complain to the water authority that your supply isn’t good enough to use a washing machine with.
How do you fix poor water flow?
8 Steps You Can Take to Increase Water Pressure in Your Home
Contact your neighbors.
Check your well pump.
Test the pressure yourself.
Clear the clogs.
Open your main water valve.
Replace the water pressure regulator.
Look out for leaks.
Install a home water pressure booster.
What does low flow mean on a washing machine?
The washer is sensing a low flow of water. Check that: The household water supply is turned on and both the cold and the hot water faucets or valves are fully open. The water inlet hoses are not kinked (learn more about How to check your Fill Hoses if your Washer is not Filling)
How do I run a diagnostic on my Whirlpool washer?
What are the four trouble symptoms of washing machine?
10 Most Common Washing Machine Problems
It Bounces Around.
It’s Noisy.
Clothes Are Getting Ripped.
Improper Or Slow Draining.
My Washing Machine Won’t Spin.
There’s No Water.
The Door Won’t Open.
It’s Smelly.
How do you know if your washing machine is unbalanced?
If a top load washer’s tub begins to bang against the sides of the washer when the spin cycle begins (before reaching top speed), this indicates a likely unbalanced load. Just pause the cycle and arrange the clothes in the basket and try again.
Will a washer rebalance itself?
Top-loading washers automatically adjust to level. If something has shifted, you can relevel a top-loading washer by tipping the washer forward, then placing it back on the floor. Front-loading washers level by turning a leg to raise or lower it.
How much does it cost to fix an unbalanced washer?
Washing machine repair costs by problem
Problem
Cost range
Leaking
$75 – $200
Won’t drain
$85 – $225
Won’t spin
$120 – $350
Unbalanced drum
$200 – $400
Can an unbalanced washer be fixed?
If you determine that the washer is unbalanced, the washer’s feet can be adjusted to balance the washer. Depending on the type of washer, it may have feet at the back that self-adjust when the front feet are adjusted.
Why does washing machine become imbalanced and does not spin properly?
An imbalanced drum is a common reason for your machine not spinning. The easiest way to avoid an imbalanced drum is by making sure you don’t overload your washing machine, or if you have one large piece of laundry, add smaller pieces to balance out the load. You may also need to check that your machine is level.
How do I stop my washing machine from shaking when spinning?