See the following troubleshooting link: http://products.geappliances.com/appliance/gea-support-search-content?contentId=16539 If the fill light flashes, check your house water supply. As soon as the light starts to flash, the washer will initiate a 4 minute lock-out period.
Why is my Whirlpool washer light blinking?
The Wash Light is On or Flashing when the water level does not change for a period of time OR water is present but the control does not detect the water level changing.
How do you reset the sensor on a Whirlpool washing machine?
Why does my washer keep saying sensing?
When it gets stuck on sensing, it’s likely because of a faulty water inlet valve, shift actuator, drive motor, or main control board. A fault at any of those parts can prevent the washer from advancing past the sensing stage. Diagnosing this issue can be tricky if you don’t know what you’re doing.
Why is my sensing fill light flashing? – Related Questions
How do you reset the washing machine sensor?
Why are the lights on my washing machine flashing?
End light flashing
If the wash, rinse and spin function lights all flash at the same time, this would indicate a possible blockage in your filter or waste / drain pipe. We recommend checking your user manual as all models vary – you can also download your user manual here.
How long should a washer stay on sensing?
These sensing spins may take 2 to 3 minutes before water is added to the load. The washer will then move the load briefly, pause to allow water to soak into the load, and resume adding water. This process may repeat until the correct amount of water has been added to the load.
How do you bypass a washing machine sensing?
Here is a simple way to do this:
Let us say you have 2 lbs of clothes.
Add the 2 lbs of clothes in the washtub.
Before commencing the wash cycle, pour 4 lbs of water over the clothes and let water to soak into the fabric.
Start the wash cycle.
You have successfully bypassed water level sensor.
What does sensing mean on LG washer?
After aligning the gears of the motor, the tub rotates for about 30 seconds in one direction to detect the weight of the laundry. Once load sensing is complete, the fill level, selected cycle, number of rinses, and spin speed are calculated and a total estimated time is displayed as water is supplied.
How do I reset the sensor on my Samsung washer?
Reset your washing machine
There really isn’t a way to reset the washing machine. What you can do instead is power cycle it: Unplug it (or turn off power at the circuit breaker), wait some time for the electrical charge to clear out of the washer (usually 1 to 5 minutes at most), and then power it up again.
How do I reset my Smart sensor?
What does sensor wash mean on washing machine?
The Sensor Wash feature senses the incoming water temperature and automatically adjusts the water temperature to the selection you have chosen. This provides you with the best washing and rinsing results. The temperature ranges are obtained by controlling the fill valve.
How do you test a washing machine sensor?
What are the four trouble symptoms of washing machine?
10 Most Common Washing Machine Problems
It Bounces Around.
It’s Noisy.
Clothes Are Getting Ripped.
Improper Or Slow Draining.
My Washing Machine Won’t Spin.
There’s No Water.
The Door Won’t Open.
It’s Smelly.
What is the first step of troubleshooting the malfunctioning washing machine?
The first thing you should always check is if the machine is plugged in. It may sound silly but dozens of times this problem has been solved by simply checking the plug. If the power cord is plugged in, check to be sure the outlet has power and that your circuit breaker wasn’t tripped. Check the water supply.
Where is water sensor in washing machine?
You can distinguish the water level switch from other round switches inside the washer cabinet by its rubber tube that runs from the switch down the side of the tub.
How much are washer sensors?
₹449.00 FREE Delivery.
Where is the water level sensor on a Whirlpool washer?
Look for the water level switch on the right side of the cabinet toward the back of the washer. The round water level switch attaches to the side of the cabinet. A rubber tube connects the water level switch to the washtub.