Why is my Kenmore washing machine not draining?

If your washing machine does not automatically drain the wastewater, the machine’s waste hose might be clogged. To unclog the waste hose, remove the hose from the back of the washing machine by unclipping it. Then, clear it out using running water and a toilet snake.

How do I reset my Kenmore Series 500 washer?

How do you fix a Kenmore washer that won’t drain or spin?

How do you manually drain a Kenmore washer?

How to Manually Drain a Top-Loading Washing Machine
  1. Step 1: Turn off the power and lay down towels. For safety, unplug the machine.
  2. Step 2: Locate the drain hose at the back of the washing machine. Pull the washer away from the wall to give yourself more space.
  3. Step 3: Drain the water.

Why is my Kenmore washing machine not draining? – Related Questions

Is there a way to force my washer machine to drain water?

Try the spin cycle

If your machine allows it, try manually setting it to the spin cycle and running it to see if it drains. You may also try restarting the entire wash cycle to see if it works.

How do you reset a washer that won’t drain?

Unplug your washer for about one minute. Then, plug the appliance back in. Open and close the door six times in 12 seconds to tell the computer to reset everything.

How do you drain a Kenmore dishwasher with standing water?

What do you do with the clothes in the washer that won’t drain?

If the filter has checked out, next is to check the drain pump. It may have become clogged with debris itself or it could be malfunctioning and needs to be replaced. You can check the drain pump by removing the drain hose and as well as the back panel of your washer.

What is the drain button on a washing machine?

What Does the Drain Function on a Washing Machine Do? A washing machine’s drain function removes water from the tub during the spin cycle. The washer pump forces water from the bottom of the appliance into the drain hose.

How do you drain the water from a Kenmore front load washer?

Does Kenmore Series 500 washer have a filter?

Kenmore series 500 does not have a lint filter. They However have a coin trap that can be found on the bottom of the wash tub. Instead, they have a self-cleansing pump that has a pump filter that removes lint from your laundry. The pump filter can be located at the back of the washer by taking off the back panel.

How do you reset a washing machine drain?

Unplug your washer for about one minute. Then, plug the appliance back in. Open and close the door six times in 12 seconds to tell the computer to reset everything.

How do I put my Kenmore washer in diagnostic mode?

3 Answers
  1. With the washer empty, close the door.
  2. Push “control/on” or “Start”
  3. Select “Drain/Spin”
  4. Select “No Spin” by pressing SPIN SPEED touchpad.
  5. Push “PREWASH” option four times within 5 seconds. (If there is no PREWASH option, press RINSE HOLD 4 times in 5 seconds.)
  6. C:00 should light up and begin the diagnostic.

How do you run diagnostics on a Kenmore 500 washer?

How do you calibrate a Kenmore 500 Series washer?

How do I reset my washing machine motherboard?

To reset the electronic controls on your washer, shut off the circuit breaker or fuse to the washer or unplug the washer for 2 minutes. For models that have a timer control knob, turn the knob around and back to any position other than final spin for the interrupted cycle. Then, restore power.

Does unplugging a washer reset it?

On a machine without a reset button, unplugging the washer and then plugging it back in often serves as the means to reset it. Although not usually a button, programmable washing machines might have a reset function or position to clear a program problem.

Leave a Comment