Why does my Maytag washing machine soap dispenser fill with water?
•
Some Water is Normal
A small amount of water within the dispenser area after a cycle is normal. If larger amounts of water, detergent, or fabric softener remain, remove the dispenser and clean thoroughly.
Where do you put detergent in a Maytag washer?
Step 3: Add Detergent
Pour detergent in the dispenser or, if there isn’t one, directly into the tub before adding clothes.
If your washer is High-Efficiency (HE), only use HE detergent.
If using detergent pods, color-safe bleach or fabric softener crystals, add them directly to the tub before loading clothes.
How do I clean my Maytag top loader detergent dispenser?
Dispenser Drawer
Pull the drawer out until you feel resistance.
Push the two tabs downward, and then continue pulling out.
Wash in warm, soapy water using a mild detergent.
Rinse with warm water.
Air dry, or dry with a towel, then place back into the slot.
How do you remove a Maytag dispenser drawer?
The dispenser drawer is removable for easy cleaning.
Unlock the dispenser drawer by pressing the Dispenser Release Lever. Remove the drawer. Remove the inserts from the drawer. The inserts are the detergent selector and covers of the softener and bleach dispenser.
Why does my Maytag washing machine soap dispenser fill with water? – Related Questions
How do you remove a dispenser drawer?
How do you unlock a Maytag dispenser?
Press and hold TO LOCK for 3 seconds to lock the dispenser. Press and hold TO LOCK a second time to unlock the dispenser. The display screen indicates when the dispenser is locked. Controls, Settings and Features vary by model; Check your Owner’s Manual for specific information.
Why is my Maytag washer not dispensing detergent?
The dispenser may be clogged if your additives do not release into the wash. A clogged dispenser can block the flow of water through the dispenser. Remove the dispenser, by pressing the release lever and rinse leftover detergent or additives that could clog the flow of water through the dispenser.
How do you unlock a dispenser?
How do you unlock a water dispenser?
How do you remove the detergent tray from a Maytag washer?
How do I remove the drawers from my Maytag washer pedestal?
Remove the pedestal drawer.
Using a 1/4″ nut driver, remove the hex-head screws from both drawer slides and save the screws. Remove the drawer from the slides and set it aside. Push the slides back into the pedestal.
How do you clean a Maytag soap dispenser?
How do you remove the dishwasher dispenser?
How do I change the detergent dispenser on my Maytag dishwasher?
How do you remove the detergent dispenser from a front load washer?
How do you remove a soap dispenser?
How to Remove a Kitchen Sink Soap Dispenser
Remove the lid/pump part of the dispenser.
Get under the sink. Reach up and unscrew the bottom part of the dispenser. Remove.
Scrape off the ring that rested over the hole that held the dispenser in place. It will either be held on with sticky tape or plumbers putty.
Why does my soap dispenser get stuck?
The soap you are using may be causing the clog. Some soap dispensers require a thin soap, so a diluting the soap may help prevent the clogging. If you are trying to use your soap dispenser and the trigger stays depressed and doesn’t let you pump the dispenser the spring in the pump mechanism may be jammed.