The standard washing machine drain size is 2 inches, and the minimum requirement is 1 1/2 inches. Modern washers typically require a larger drain, and you may need a larger drain if it’s connected to your kitchen sink. Standpipes should be between 18 and 30 inches from the floor.
What is a laundry box in plumbing?
Laundry boxes are recessed into the wall behind the washing machine and provide water supply line connections and a wastewater drain. These outlets improve the look of your laundry area by hiding pipes and tidying hoses. More importantly, they provide easy shutoff valves in the event of a leak or a burst hose.
Does a laundry box need to be vented?
All plumbing fixtures—including washing machines—must be vented. Improperly vented drains can be sluggish and noisy, and can emit hazardous fumes. Properly vented drains allow the P-trap to do its job: prevent sewer gases from escaping into your home.
Why use a washing machine outlet box?
These washing machine outlet boxes provide quick, safe, water supply shut-off access. Complete with knockouts for waste or water lines, the box provides a recessed space for your supply valves. Heavy-duty mounting straps and an adjustable faceplate are also included.
What size is the drain on laundry box? – Related Questions
How much does it cost to install a washer outlet box?
Most washers require a 120V outlet, which is the standard outlet you’ll find in most homes, while most dryers call for a 240V outlet. Installing a new outlet for either of these types usually costs around $100 to $250, including labor costs.
What is the code for washing machine drain pipe?
802.4.
Standpipes shall be individually trapped. Standpipes shall extend not less than 18 inches (457 mm) but not greater than 42 inches (1066 mm) above the trap weir. Access shall be provided to standpipes and drains for rodding.
How high does a washing machine drain box need to be?
Once you’ve selected the right washing machine outlet box for your situation, it should be installed at a height where the flood level rim (or the top of the drainage outlet) is 32” to 34” above the finished floor.
Where should a washing machine drain to?
Wastewater from your washing machine and dishwasher may either go to your septic tank and/or cesspool or to a separate disposal system called a dry well.
Can a washer and toilet share the same drain?
Your drains are connected – One of the main reasons your toilet gurgles when your washer machine drains is because your washer machine is connected to the toilet drain. This isn’t uncommon. Your washing machine might have been placed in between your toilet and sewer stack.
Does washing machine need separate outlet?
Washer and Dryer
Generally, any equipment that runs on 220-volt power will need its own circuit.
Is a GFCI outlet required for a washing machine?
The NEC doesn’t require GFCI protection for clothes washing machines specifically, but it does for “Laundry Areas.”
Do I need a special outlet for washer and dryer?
Your washing machine should run on a standard 110 outlet. Most dryers will not only require a special outlet and enough power to run them, but a special cord to match. If you don’t have a dryer outlet established and properly wired, call an electrician.
Is it OK to plug a washing machine into a GFCI outlet?
If you are renovating your laundry room, adding an addition to your house with a laundry room, or building a new home with a laundry room, it is now required that a washing machine be installed with a ground-fault circuit-interrupter (GFCI) outlet/receptacle.
Does a washing machine need a 15 or 20 amp outlet?
Washer Receptacle
The 120-volt, 20-amp circuit supplies a receptacle for the washing machine. It is typically wired with 12-gauge, two-wire cable containing a hot wire, a neutral wire, and a ground wire. The receptacle is a 20-amp GFCI receptacle.
What is code for outlets in laundry room?
Section 210.52(F) requires a receptacle outlet to be installed for the laundry area and it must be supplied by a 20-ampere branch circuit in accordance with 210.11(C)(2). However, depending on the location of the receptacle outlet itself, GFCI protection may be required.
Does a washing machine need a 20 amp circuit?
Your laundry room should have a dedicated circuit of at least 20 amps. If you have a gas dryer, both your washing machine and gas dryer may be plugged into the same outlet. If you have an electric dryer, it will need its own dedicated 20-amp, 220-volt circuit.
Can you plug a washer into a regular outlet?
Washer –Washing machines are large appliances that do not require customized electrical hookups, they simply need a 120 volt outlet that can take 3 prongs.
Can you run a washer on a 15 amp breaker?
Because of that, all 120V 15 Amp devices are normally designed to work properly in a 120V 15 Amp or 120V 20 Amp circuit. This is true for appliances like a washing machine but even for something as small as a cell phone charger that actually uses < 1 Amp.
What size breaker should I use for a washing machine?
Requires a 120 Volt, 60 Hertz, individual, properly grounded branch circuit with a 3 prong grounding type receptacle, protected by a 15 or 20 Amp circuit breaker or time-delay fuse.