Electrical hookups for washers and dryers should be placed within 6 feet of the unit. While a minimum height for outlets in a home may very, depending on local building codes, for convenience both outlets should be placed between 34 and 36 inches high.
What is the height of a washer and dryer box?
Standard washer and dryer sizes are generally 27 inches wide, 39 inches tall and 32 to 34 inches deep for front load units. Whereas, top load washers and dryers are typically 27 inches wide, 42 to 44 inches tall and less deep with depths of 27 to 28 inches.
How high should a dryer outlet be from the floor?
Tips for Installing a Dryer Outlet
A height of about 30 to 36 inches from the floor usually suffices to keeps the plug accessible while hiding it from view behind the dryer. Orient the outlet properly: Orient the outlet so the L-shaped (neutral) slot is at the bottom.
How tall should a washing machine standpipe be?
The standpipe for the clothes washer must be trapped. The standpipe height should be at least 18 inches (457 mm) and no more than 42 inches above the trap weir.
What is the height of a washer outlet? – Related Questions
What is the code for washing machine drain pipe?
According to the Universal Plumbing Code, the standard drain size for a washing machine is 2 inches. The absolute minimum should be about 1 1/2 inches. However, keep in mind that wash load capacities can vary by up to 400% or more depending on the model.
What is code for washing machine standpipe?
The standpipe shall extend not less than 30 inches (762 mm) above the weir of the standpipe trap and shall extend above the flood level rim of the laundry tray. The outlet of the laundry tray shall not be greater than 30 inches (762 mm) horizontal distance from the side of the standpipe.
What is the minimum height of a standpipe?
Also, the 18-inch minimum height of the standpipe intends to prevent the possibility of the clothes washer’s pumped waste from overflowing the standpipe.
How tall should laundry drain pipe be?
Laundry standpipes must be tall enough to extend past the washing machine’s overflow line—typically 30-36” in height, or 18”-30” above the trap. P-trap. P-traps prevent hazardous and potentially flammable sewer gases from entering your home.
What is the maximum height of a standpipe?
Standpipes shall be 2 inches (51 mm) in diameter and not less than 18 inches (762 mm) or more than 48 inches (1219 mm) in height as measured from the crown weir. The standpipe shall extend 34 inches (864 mm) minimum above the base of the clothes washer unless recommended otherwise by the manufacturer.
Does a washing machine waste pipe need to be high?
The drain hose should be connected to the standpipe at the correct height for it to work properly. Ensure the highest point of the water drain hose is a minimum of 40 cm and a maximum height of 100 cm from the floor.
Can a washing machine drain be too low?
Proper Standpipe Height
Placing your standpipe too low or too high can cause backflow and overflow. A standpipe that is too low is prone to overflowing from the standpipe itself, while a standpipe that is too high makes the washing machine have to work harder to pump drained water to the standpipe.
What is the minimum height for a standpipe for a washing machine drain?
The standpipe shall extend not less than 30 inches (732 mm) above the weir of the standpipe trap and shall extend above the flood level rim of the laundry tray. The outlet of the laundry tray shall not be greater than 30 inches (762 mm) horizontal distance from the side of the standpipe.
Does a washing machine drain need a P-trap?
If they omit the trap and vent, it’s a mistake that can cause problems on two counts. The lack of a P-trap exposes the area to sewer fumes and the lack of venting will cause the drain to run sluggishly and overflow. Washers, like all fixtures, need a trap.
How high does a washing machine drain box need to be?
Once you’ve selected the right washing machine outlet box for your situation, it should be installed at a height where the flood level rim (or the top of the drainage outlet) is 32” to 34” above the finished floor.
Can a washer and toilet share the same drain?
Your drains are connected – One of the main reasons your toilet gurgles when your washer machine drains is because your washer machine is connected to the toilet drain. This isn’t uncommon. Your washing machine might have been placed in between your toilet and sewer stack.
How high should a washing machine trap be?
The only code standard is that the top of the standpipe above the trap weir (top level of standing water in the trap below) can’t be less than 18” or or more than 42” according to the Residenital Edition of the Florida Building Code (P2706. 1.2) and the International Residential Code.
Is it really necessary to have ap trap above the floor for washing machine?
All traps must be installed on the same floor as the fixture served with the exception of tubs and showers. If you create a waste pipe for any fixture that needs draining, including a washing machine, and the drain doesn’t have a properly installed P-trap, you’re creating a dangerous situation.
Can a sink and washing machine share the same trap?
A washer and a sink can share a drain. However, this setup is not recommended. The washer will constantly put water into the drain, while the sink will constantly take water out. Over time, this will cause a build-up of debris in the pipe and eventually lead to a clog.