According to the Universal Plumbing Code, the standard drain size for a washing machine is 2 inches. The absolute minimum should be about 1 1/2 inches. However, keep in mind that wash load capacities can vary by up to 400% or more depending on the model.
What height should the plumbing box be in a laundry room?
Once you’ve selected the right washing machine outlet box for your situation, it should be installed at a height where the flood level rim (or the top of the drainage outlet) is 32” to 34” above the finished floor.
What is the correct height for a washing machine drain?
In order for the drain hose on your Top Load washer to function properly, the drain must be at least 30″ up from the floor and less than 8 feet high. In order for the drain hose on your Front Load washer to function properly, the drain must be at least 24″ up from the floor and less than 8 feet high.
Can a washing machine drain into 1 1 2 pipe?
Drainage Problems
To drain water properly, a pipe connecting your washing machine and the sewage system must be at least 1-1/2 inches in diameter. Many building codes require you to use pipes that are 2 inches or larger.
What is the code for washing machine drain pipe? – Related Questions
Can a washer and toilet share the same drain?
Your drains are connected – One of the main reasons your toilet gurgles when your washer machine drains is because your washer machine is connected to the toilet drain. This isn’t uncommon. Your washing machine might have been placed in between your toilet and sewer stack.
Does a washing machine drain need to be elevated?
Elevating A Washing Machine Drain Hose
To be safe, you should always raise the drain hose above the level of the washing machine. This will keep any siphoning to a minimum. You may also take other measures to make sure you receive the best drainage possible.
How much water can a 1 1/2 pipe drain?
A 1 1/2 in. drain can easily accommodate 4.9 gpm for cast iron and 8.3 gpm for PVC.
Can you use a 1.5 drain for a shower?
Current plumbing codes (IPC as well as MA Plumbing Code 248 CMR 10 for instance) need 1.5 inches to drain for a tub with a shower. The tub can drain at leisure and the shower function when in utilize, with flow-limiting showerheads, fall within the flow rate that a 1.5” drain can handle.
What size is a washing machine pipe fitting?
One 15mm compression pipe connection and two 3/4 inch BSP threaded connections (the normal size for washing machine hoses).
Can you drain a washing machine into a vent pipe?
The best way to vent a washing machine drain pipe is to run it into an existing plumbing vent stack. If this is not possible, you can install a separate vent stack. Either way, it’s important to ensure that the vent stack is properly sized and installed to prevent future problems.
Does a washer drain need its own vent?
All plumbing fixtures—including washing machines—must be vented. Improperly vented drains can be sluggish and noisy, and can emit hazardous fumes. Properly vented drains allow the P-trap to do its job: prevent sewer gases from escaping into your home.
How far from the waste pipe on a washing machine?
We strongly recommend you have someone assist you when lifting, tilting and moving your washing machine. Make sure that the drain hose has not been inserted too far into the waste pipe. The maximum should be 15cm inserted, otherwise a vacuum may form which can cause siphonage.
Does a laundry drain need a trap?
If they omit the trap and vent, it’s a mistake that can cause problems on two counts. The lack of a P-trap exposes the area to sewer fumes and the lack of venting will cause the drain to run sluggishly and overflow. Washers, like all fixtures, need a trap.
Should a laundry room have a floor drain?
Floor Drain
The 2017 IRC code does not specifically require floor drains to be installed in laundry rooms, but buildings often include them to provide for emergency drainage or to help with other drainage needs (e.g., relief valves, water heater drainage, condensate drainage, etc.).
Can a washer and shower share the same drain?
You can tie in a shower and tub drain to your washing machine drain as long as there is a vented pipe tied into the drain to keep the flow moving along fluidly.
Does every trap need a vent?
Every fixture is required to have an internal or external trap; double trapping is prohibited by plumbing codes due to its susceptibility to clogging. Every plumbing fixture must also have an attached vent. Without a vent, negative pressure from water leaving the system can cause a siphon which empties the trap.
How far away can a vent pipe be from a toilet?
According to the UPC, the distance between your trap and the vent should be no more than 6 feet. In other words, for the vent to work properly, it needs to feed into the drain line within 6 feet of the trapways that connect to it.