What does the key symbol mean on my Bosch washing machine?
•
When the child lock is activated, there will be a key symbol in the display and all the washing machine buttons will be disabled. To deactivate the child lock, press and hold the start button for three to five seconds. After this time you will hear an audible beep and the key symbol will disappear.
What do washing machine symbols mean?
Washing symbols
A tub icon with a wavy line means an item can be machine washed. A tub icon with a hand indicates an item should be hand washed. A tub icon with cross through it means do not wash. A circle indicates dry clean only. A circle with a cross through it means do not dry clean.
What are the symbols on the washing machine tray?
Symbols on Washing Machine Detergent Drawers
When it comes to putting these products in the right place, general guidelines include three symbols: I= pre wash. II= main wash. Flower symbol= fabric softener.
How do you clear the error code on a Bosch washing machine?
What does the key symbol mean on my Bosch washing machine? – Related Questions
How do you read a washer error code?
How do you run a diagnostic on a Bosch washing machine?
How do I clear the e18 error on my Bosch washing machine?
Open and remove the service flap. Drain off all water using a drainage hose or by removing the pump cover slowly (prepare for a lot of water with a larger container). Clean the interior, the thread and the housing of the pump so that the impeller is able to rotate. Refit the pump cover and screw back firmly.
How do you reset Bosch E15 error code?
The Bosch E15 error code is likely indicating too much water in the dishwasher; however, the error code could also be due to a control board glitch. If the error code was caused by a glitch, performing a hard reset by disconnecting the power to the dishwasher for five minutes should clear the error code.
How do you reset the error on a washing machine?
First, you should perform a general reset of the machine. Turn the machine off at the powerpoint, wait for one minute, and then turn it back on.
How do you clear f21 code on Bosch washing machine?
Check the drain hose to make sure it is not kinked or clogged. Check the electrical connections to the pump and ensure the pump is running. Remove the drain pump filter and check for foreign objects and/or debris. try changing the filter thats what we did because particles like sand and beads can get into the filter.
What does E21 mean on a Bosch washing machine?
E21 / F21. In a nutshell this error code means your Bosch washing machine is experiencing problems with its motor and it stops running.
What does F21 error code mean?
The Whirlpool washer error code F21 means the washing machine has a “water draining issue”, meaning the drain pump itself, or the drain hose is clogged and the washer is having problems draining the water out. In other words, the washer is taking too long to drain the water out of the tub.
What does F21 mean?
Appliance Express. October 4, 2021. If your Whirlpool washer has an F21 error code, it indicates that your washer has a drainage problem. The good news is the issue can usually be resolved by simply clearing the drain filter or drain hose.
What does F20 stand for?
An F20 or FH error code indicates a water supply problem. Here are some common issues: Both hot and cold water must be connected and turned on. Water inlet hoses kinked. Water inlet valve screen clogged.
What do F codes mean?
What Causes the F Error Code? An F error code is usually triggered by either a voltage drop in the home network, a severe voltage surge, or a short circuit. Some models may communicate this issue by displaying an F1 error code.
Why is my front load washer not draining?
Over time, debris can clog the drain hose and prevent your washer from draining. A twisted or coiled drain hose can also inhibit the free flow of water. Check behind the washer and straighten a kinked hose. If this does not solve the problem, unplug and clean the hose to eliminate any residue.
What causes a washing machine not to drain and spin?
If the washer won’t drain or spin, either something is stuck in the washing machine drain hose or pump, or the pump is broken. If a washer won’t drain or spin, the fix is simple if you’re even just a little bit handy with tools.
How do you force a front load washer to drain?
How to drain a washer filled with water
Try the spin cycle.
Turn off the power and water supply.
Remove and check the drain hose.
Check to see if it will drain with the help of gravity.
Check your machine’s inner workings.
Check the drain pipe.
Drain manually if needed.
Call a service professional.
Is there a way to force washer to drain?
Turn the knob slowly until water starts coming out.Fill the container, turn the knob off, dump the water into a sink or basin, and repeat until the water has been drained completely. If you have a drain pump filter and tube, unclip the drain tube and unscrew the end cap when you’re ready to release the water.
Does spin cycle drain water?
Spin cycle: your washing machine superpower that removes excess water from your clothes. How? It’s not magic! The motor makes the drum rotate at high speed, while the pump drains the water.