A tub icon with a wavy line means an item can be machine washed. A tub icon with a hand indicates an item should be hand washed. A tub icon with cross through it means do not wash. A circle indicates dry clean only. A circle with a cross through it means do not dry clean.
What do the washing machine symbols mean? – Related Questions
How long is Whirlpool normal wash cycle?
A normal wash cycle usually takes between 50 minutes to an hour to complete. However, this time could be faster or slower depending on load size and the cycles or options you choose.
How do I operate my washing machine?
How to use a front load washing machine
Dose correctly. Follow the instructions on the packaging of your laundry detergent, like Ariel Matic Liquid.
Load the laundry. Open the door and place the laundry in the machine.
Choose the temperature.
Select the right spin cycle.
Close the door and press go.
Unload clothes.
How do you use a Whirlpool washing machine for the first time?
Where do you put the detergent in a Whirlpool washer?
How do I start my Whirlpool front load washer?
Touch and hold for up to 3 seconds until the light above Start/ Pause comes on to start a cycle, or touch once while a cycle is in process to pause it. You should see a 3-2-1 countdown while holding the Start button. If you see “Err” instead, make sure the door is closed before starting a cycle.
Why is my Whirlpool washer not washing my clothes?
Have you run a Clean Washer Cycle? If you feel that the clothes are not coming clean or that the washer level is lower than when you first started using this washer, try running a Clean Washer cycle. This cycle re-calibrates the control, and resets it back to the factory-set water levels.
Why won’t my Whirlpool washer start the wash cycle?
Washer needs a reset: Resetting the machine can cycle its power, enabling it to start again. Unplug the washing machine or turn off its power at the circuit breaker. After one minute, restore power and try starting the washer.
How do I reset my Whirlpool Whirlpool washer?
Why is my washing machine spinning but not washing?
If your washer won’t agitate but spins, a broken agitator may be to blame. The agitator is the centerpiece in a top load washer that agitates and moves the clothes through the water during the wash cycle. The output shaft of the transmission is splined to the agitator to secure it in place.
Why won’t my washer agitate or spin?
Why won’t my Whirlpool washer agitate or spin?
If the lid switch does not have continuity, replace it. On most top load machines the washer will not agitate or spin without the lid being fully closed. Close the lid after loading the washer and ensure there are no obstructions. The drive motor might be defective.
Why are my clothes still wet after spinning?
Why are the clothes still wet? Well, this issue is either caused by the load not being able to spin fast enough or water not being able to drain, so it ends up back in the tub resoaking the clothes. If you are lucky, adjusting the washing load or changing detergents will solve the problem.
Why are my clothes soaking wet in the wash?
Drainage Hose May be Blocked or Kinked
The most likely cause for a washer to return soaking wet clothes is a drain hose problem. Here is how you should resolve and clean: Clean the filters in the water supply hose. Attention: The leaking water may be very hot with a risk of scalding.
Why is my laundry soaking wet?
The most likely culprit for a washer that spins but still turns out soaked clothing is a drain hose problem. It could be clogged, kinked, or even positioned incorrectly if you had to remove the drain tube to make another repair already.
Why is my blanket soaking wet in washer?
An Underpowered Spin
Unfortunately, if your washer has an underpowered spin, your items may not be spun fast enough to eliminate all the excess water. If you unload your washer and the items are soaking wet, yet there is no standing water in the machine, this is the most likely culprit.