Once you’ve selected the right washing machine outlet box for your situation, it should be installed at a height where the flood level rim (or the top of the drainage outlet) is 32” to 34” above the finished floor.
How high off the ground should a dryer outlet be?
Tips for Installing a Dryer Outlet
A height of about 30 to 36 inches from the floor usually suffices to keeps the plug accessible while hiding it from view behind the dryer. Orient the outlet properly: Orient the outlet so the L-shaped (neutral) slot is at the bottom.
What is code for outlets in laundry room?
Section 210.52(F) requires a receptacle outlet to be installed for the laundry area and it must be supplied by a 20-ampere branch circuit in accordance with 210.11(C)(2). However, depending on the location of the receptacle outlet itself, GFCI protection may be required.
Where does the washer outlet go?
How high should a washing machine outlet box be? – Related Questions
How high can you put a washing machine drain hose?
In order for the drain hose on your Top Load washer to function properly, the drain must be at least 30″ up from the floor and less than 8 feet high. In order for the drain hose on your Front Load washer to function properly, the drain must be at least 24″ up from the floor and less than 8 feet high.
Should a washing machine be plugged into a GFI outlet?
The NEC doesn’t require GFCI protection for clothes washing machines specifically, but it does for “Laundry Areas.”
Where does the washing machine drain pipe connect to?
Where does a washer drain pipe lead to?
If your washer and its parts work as they should, water moves through the hose and into the standpipe where it’s eventually carried to your home’s main sewage line.
Where does laundry room drain go?
Water on the laundry room floor moves to a 2-inch drain covered by a grate. The water flows vertically down a short initial section of ABS pipe below the floor, then through a P-trap, and out to the sewer main via branch drain lines within the house.
Where do you connect washing machine waste pipe?
What is the code for washing machine drain pipe?
According to the Universal Plumbing Code, the standard drain size for a washing machine is 2 inches. The absolute minimum should be about 1 1/2 inches. However, keep in mind that wash load capacities can vary by up to 400% or more depending on the model.
Does a washing machine receptacle have to be dedicated?
Washers and dryers have powerful motors heating elements, making a dedicated circuit necessary to prevent overloading the electrical system. Generally, any equipment that runs on 220-volt power will need its own circuit.
How long should a washing machine drain pipe be?
You can fit a washing machine drain a maximum of 2.7 m (9 ft) from your washing machine. Washing machines come with standard 1.5 m (4.9 ft) hoses, but you can safely extend them with pipes that are a maximum of 1.2 m (4 ft) long.
Does a washing machine drain need to be elevated?
Elevating A Washing Machine Drain Hose
To be safe, you should always raise the drain hose above the level of the washing machine. This will keep any siphoning to a minimum. You may also take other measures to make sure you receive the best drainage possible.
Can a washing machine drain be too high?
A washing machine drain can be too high to pump. Washer drain pumps have a specified power rating, so they can only pump out water at a certain flow rate for a particular drain height. If the drain is too high, the flow rate will be too low to push the water out of the washer, resulting in backflow.
Can you put a 90 in a drain line?
It’s a bad plumbing practice to have a hard 90-degree bend in a horizontal drain line that’s buried in a slab or otherwise hidden. If you have to make a 90-degree bend, use two 45-degree fittings and put a small piece of straight pipe between the fittings, if possible.
Can a drain line be too steep?
If the slope is not steep enough, the sewage slows down, resulting in clogs. If it’s too steep, water and solids can separate, causing solids to accumulate in the pipe.