In order for the drain hose on your Top Load washer to function properly, the drain must be at least 30″ up from the floor and less than 8 feet high. In order for the drain hose on your Front Load washer to function properly, the drain must be at least 24″ up from the floor and less than 8 feet high.
Can the drain hose be higher than machine?
To be safe, you should always raise the drain hose above the level of the washing machine. This will keep any siphoning to a minimum. You may also take other measures to make sure you receive the best drainage possible.
How high should a laundry drain be?
Generally, it should be between 18 and 30 inches from the floor. The water volume could pull the trap dry if it’s any higher than that. The standpipe connects the drain hose to the sewer line. It keeps the water level in the washing chamber below the drain to control the flow of water.
What is the code for washing machine drain pipe?
The plumbing code limits the length of a tail piece to 24 inches. The one exception to this rule is the stand pipe, [washing machine drain]. An auto washer station stand pipe must be at least 18 inches long but no more than 30 inches including off sets.
How high can washing machine drain be? – Related Questions
Does a washing machine waste pipe need to be high?
The drain hose should be connected to the standpipe at the correct height for it to work properly. Ensure the highest point of the water drain hose is a minimum of 40 cm and a maximum height of 100 cm from the floor.
Can a washer and toilet share the same drain?
Your drains are connected – One of the main reasons your toilet gurgles when your washer machine drains is because your washer machine is connected to the toilet drain. This isn’t uncommon. Your washing machine might have been placed in between your toilet and sewer stack.
Are washing machine drain pans required by code?
Drain pans aren’t a requirement for your washer, but they are an inexpensive and simple way of protecting your home by catching small leaks and reducing the amount of water damage from broken hoses. If your laundry room is upstairs, a drain pan is recommended to protect against leaks that can seep into the rooms below.
Where should a washing machine drain to?
What is the stand pipe length for a washing machine drain?
No standpipe receptor for a clothes washer shall extend more than 30 inches (762 mm), or not less than 18 inches (457 mm) above its trap.
Does a washing machine waste pipe need a trap?
If they omit the trap and vent, it’s a mistake that can cause problems on two counts. The lack of a P-trap exposes the area to sewer fumes and the lack of venting will cause the drain to run sluggishly and overflow. Washers, like all fixtures, need a trap.
Can a washing machine waste pipe go uphill?
No.Any uphill runs will collect the fat and sludge and become blockages.
Can a washing machine drain into a utility sink?
In most homes, washing machines are installed in kitchens or utility rooms and drain into the sink or standpipe. To prevent backflow and siphonage, the hose should be connected at the correct height to fit your drain. The height of the hose bracket should be between 40 and 100 centimeters.
Can a washer and shower share the same drain?
You can tie in a shower and tub drain to your washing machine drain as long as there is a vented pipe tied into the drain to keep the flow moving along fluidly.
Why does my sewer back up when I use the washing machine?
The main sewer drainpipe under your house connects all the drains in your home, such as sinks, tubs, showers, and toilets. Because the washing machine uses so much water, it can cause backups in all of your house’s drains if you have a large clog.
How do you drain a washing machine without going everywhere?
If you have a drain pump filter only, place the shallow container up against the machine, directly under the filter, to catch the water. Turn the knob slowly until water starts coming out. Fill the container, turn the knob off, dump the water into a sink or basin, and repeat until the water has been drained completely.
Why does a washing machine need a standpipe?
A laundry standpipe connects a washing machine’s drain hose to a home’s waste stack. While it might be tempting to simply connect your washer to any other convenient drain line, doing so increases the risk of water overflow and sewer fumes.
What happens if washing machine drain is too low?
If the drain is too high, the machine won’t be able to propel the water up through the hose. If it’s too low, the water will flow right back into the drum after being pumped out. Either of these scenarios will result in a washer that stays full of soapy, murky water.
At what height is a standpipe required?
1. Height – Section 905.3. 1requires a Class III standpipe throughout a four-story building measured from grade plane or when the level of the highest or lowest floor is located 30 feet above or below the level of fire department access.
Can a washer drain hose be too long?
Make sure that the drain hose is not stretched, pinched, crushed, or kinked. Do not install the drain hose with the end lower than 29.5 inches (75 cm) or higher than 96 inches (244 cm) above the bottom of the washer or more than 60 inches (152 cm) away from the washer.
Why washing machine drain hose is high?
The drain plumbing should be at least 30″ high to ensure that no water is siphoned. The drain hose must be at least 30″ from the floor and less than 8 feet long in order to operate properly.