In order for the drain hose on your Front Load washer to function properly, the drain must be at least 24″ up from the floor and less than 8 feet high. GE and Hotpoint Top Load, Front Load and Unitized washers have powerful drain pumps that can pump water vertically as high as 8 feet above the floor.
Can a washing machine drain be too high?
Most washing machines require a standpipe with a height of at least 36 inches. Check your manual to find out the requirements for your particular unit, and ensure your standpipe meets this minimum requirement. Placing your standpipe too low or too high can cause backflow and overflow.
How high can a Whirlpool washer pump water?
Top of standpipe must be at least 39″ (990 mm) high; install no higher than 96″ (2.44 m) from bottom of washer. If you must install higher than 96″ (2.44 m), you will need a sump pump system.
Can the drain hose be higher than machine?
To be safe, you should always raise the drain hose above the level of the washing machine. This will keep any siphoning to a minimum. You may also take other measures to make sure you receive the best drainage possible.
How high can a washing machine pump out? – Related Questions
What is the maximum height for a washing machine standpipe?
No trap for a clothes washer standpipe receptor shall be installed below the floor, but shall be roughed in not less than 6 inches (152 mm) and not more than 18 inches (457 mm) above the floor.
Can the drain be higher than the P-trap?
A sink’s P-trap can go higher than the drain pipes, but it must not go lower than the pipe. The P-trap connects directly to the sewer to create an efficient drainage system. But if the drainpipe hangs above the P-trap, the flow becomes restricted.
Can dishwasher drain hose be elevated?
A high loop is when the dishwasher drain is elevated right before its connection to the kitchen sink drain. The drain hose is secured near the top of the sink in some fashion (could be as easy as using a zip tie to secure it).
Should dishwasher drain hose be elevated?
Why washing machine drain hose is high?
The drain plumbing should be at least 30″ high to ensure that no water is siphoned. The drain hose must be at least 30″ from the floor and less than 8 feet long in order to operate properly.
How do you position a drain hose on a washing machine?
How tall should laundry drain pipe be?
Laundry standpipes must be tall enough to extend past the washing machine’s overflow line—typically 30-36” in height, or 18”-30” above the trap. P-trap. P-traps prevent hazardous and potentially flammable sewer gases from entering your home.
How far should washer drain hose go?
Most washing machine manuals state that your drainage hose must enter the standpipe at a minimum of 99 cm (39 in) and a maximum of 244 cm (96 in) in height.
What is the code for washing machine drain pipe?
The plumbing code limits the length of a tail piece to 24 inches. The one exception to this rule is the stand pipe, [washing machine drain]. An auto washer station stand pipe must be at least 18 inches long but no more than 30 inches including off sets.
What height is a washing machine drain and hook up set at?
Once you’ve selected the right washing machine outlet box for your situation, it should be installed at a height where the flood level rim (or the top of the drainage outlet) is 32” to 34” above the finished floor.
Can a washer and toilet share the same drain?
Your drains are connected – One of the main reasons your toilet gurgles when your washer machine drains is because your washer machine is connected to the toilet drain. This isn’t uncommon. Your washing machine might have been placed in between your toilet and sewer stack.
Does a washing machine drain line need to be vented?
All plumbing fixtures—including washing machines—must be vented. Improperly vented drains can be sluggish and noisy, and can emit hazardous fumes. Properly vented drains allow the P-trap to do its job: prevent sewer gases from escaping into your home.
How far can a drain line run without a vent?
For pipes that have a diameter of 3 inches the distance is 6 feet and for a 4-inch pipe the most it should be away from the vent is 10 feet. Keep in mind that toilets have their own traps so there is no need to have one on the drain line, but it still must have a vent.