How do you remove a transit bolt from a washing machine?
•
Do you have to remove transit bolts from washing machine?
The transit bolts need to be removed when the appliance is being installed. They are designed to hold the drum in a fixed position while being transported. Failure to remove this will void the warranty, so please refer to the appliance manual for additional guidance.
What happens if you leave transit bolts in washing machine?
The bolts can rip sections off the outer tank, tear through the outer casing and cause massive damaging vibrations to be sent through the room in which the washing machine is installed. In other words, by not doing as instructed you risk major damage to your washing machine.
What happens if you don t remove shipping bolts from washing machine?
You need to remove the shipping bolts. If the four shipping bolts of your machine are still attached to the back of the washer, they will cause a loud noise and vibration during the operation of the machine; which can lead to a permanent damage of the washer.
How do you remove a transit bolt from a washing machine? – Related Questions
Do all new washing machines have transit bolts?
All new washing machines are fitted with a transit bolts to protect the machine against damage in transit. Transit locks and bolts must be removed before you use your appliance.
Why do you remove shipping bolts from washer?
Before installing the washing machine, it is required that you remove all shipping bolts from the back of the unit. If this has not been done prior to using the machine, the suspension inside of the washing machine will not be able to work.
What happens if you move front load washer without shipping bolts?
Shipping bolts are required because they protect the drum during the transfer of a washer. A washing machine’s suspension might be damaged by movement, causing it to malfunction.
Do washers prevent nuts from loosening?
In theory, the washer is squashed flat when the nut is tightened against mounting surface so that its sharp edges dig in to prevent the threaded fastener unwinding. In practise, it might delay the length of time it takes for the bolt to loosen, but it will not permanently prevent it.
What happens if you move front load washer without shipping bolts?
Shipping bolts are required because they protect the drum during the transfer of a washer. A washing machine’s suspension might be damaged by movement, causing it to malfunction.
Can things get stuck under drum of washing machine?
With washing machines, it’s not uncommon for items such as bra wires, zips, coins and other clothing items to become trapped between the inner and outer drum or in the drum itself.
Do you have to remove anything from a new washing machine?
The machine will most likely have brackets in place inside the drum to hold it in position while in transit. These will need to be removed before use or it will break the machine, see the manufacturer’s instructions for further detail.
Do you always need a washer with a nut?
Washers are important. They ensure that a nut is installed properly and prevent softer materials from damage by distributing the pressure over a greater surface area. Are washers necessary? Washers are not always necessary but it is common practice to use them anyway.
What goes first lock nut or washer?
When used correctly, a lock washer will hold the nut or other threaded fastener in place. To help it accomplish this, put the lock washer on first, below the fastener. If your project calls for other washers or hardware elements, they should go on before the lock washer so that it can hold them in place.
Which washer is used to avoid loosening to a nut?
Lock washers are used to prevent the bolt or fastener from loosening, effectively “locking” the bolt in place. Also known as a Belleville or spring washers, conical washers are flat washers pressed into a conical shape.
What goes first nut or washer?
The lock washer should be placed under your threaded fastener – i.e., underneath a nut or the head of a screw or bolt. In assemblies where you have a nut and a bolt, the washer should be placed between the nut and the head of the bolt. You can then tighten the threaded fastener as normal.
Do washers go on same side as nut?
Spring washers are also known as locking washers. These washers are made by removing part of a flat washer so that a twisted shape forms. However, spring washers are placed on the nut side of the fastener only, unlike flat washers, which are placed on the bolt and nut sides.
Does a washer go under screw head or nut?
Before a threaded fastener (such as a screw) is driven into a surface, a washer may be placed through the end for greater protection. This prevents the bolt head and nut from scratching or indenting the surfaces of the two fastened parts, which could ultimately loosen the fastener.
Should you use lock washers with lag screws?
Do lag bolts need washers? We highly recommend using washers with lag bolts. Washers increase the surface area in contact with the wood or application surface, reducing the chances of the hex head digging into the wood and cracking it while also making the assembly more secure.
When should you not use a lock washer?
Can I use a wedge-locking washer against SOFT surfaces? Not if you want to achieve a secure bolted joint. A soft material on the contact surface cannot hold the serrations, or it could be too brittle, and the bolt could start to rotate. This is the case for wood, soft plastic or any other similar materials.