If the washer won’t drain or is not draining properly, and the washer has a coin trap, remove the coin trap and clean it thoroughly. First, check the drain hose to determine if it is kinked, twisted, or bent. If the drain hose is bent, straighten it out. In addition, remove the drain hose and check it for obstructions.
How do I read the error code on my Whirlpool washer?
How do you read a Roper washer error code? – Related Questions
How do I run diagnostics on my washing machine?
What are the washing codes?
Washing symbols
A tub icon with a wavy line means an item can be machine washed. A tub icon with a hand indicates an item should be hand washed. A tub icon with cross through it means do not wash. A circle indicates dry clean only.
How do you read a Whirlpool diagnostic?
This is how you get into the washer’s diagnostic mode.
Washer lid should lock =”done” + “lock”
Washer cold valve should open =”spin” + “lock”
Washer hot valve should open =”spin” + “done” + “lock”
Pause 5 seconds =”rinse” + “lock”
Pause 5 seconds =”rinse” + “done” + “lock”
Pause 5 seconds =”rinse” + “spin”+ “lock”
How do I run Whirlpool diagnostic mode?
What are the most common problems on a Whirlpool washing machine?
Here are seven of the most common problems on a Whirlpool washing machine and potential fixes for them.
Washer Making Unusual Noises.
Washer Won’t Start.
Washer Lid Won’t Lock.
LD Error Code Appears.
Washer Leaves Deposits on Dark Clothes.
Washer Has a Burned Plastic Odor.
Rust Spots Appear on Washer Lid.
What does E01 and F09 mean on a washing machine?
Accepted Answer. Whirlpool Duet Washer Error Code E01 F09 means LONG DRAIN TIME. When your Whirlpool washer goes into drain mode and the drain time is past 8 minutes and not reaching the reset level in the pressure sensor then the valves in the drain are turned off and the drain pump will cease to pump out the water.
How do I fix E01 error?
Replace the door lock or reattach any loose wires as necessary and when you switch your machine back on the E01 error code should be cleared.
Switch off and unplug your machine.
Switch off and unplug your machine.
Check the door lock itself.
Check the wiring to the door lock.
What does E01 and F03 mean?
What Does the F03/E01 Error Code Mean? The error code F03/E01 indicates a problem with the water level. If your washer doesn’t get enough water, it will not be able to work correctly. Most of the time, this error code is a result of a faulty sensor, hose, or brand pipe.
How do you reset E1 F9 error on washer?
In most cases, the washer’s drain pump will need to be replaced to fix the E1/F9 error code. However, the drain hose, pump filter, or pressure switch can also cause the error code.
What does F9 error code mean?
An F9 error code on an LG oven means that the oven has failed to exceed 150 degrees Fahrenheit after five minutes of preheating. There are a number of causes and solutions to the issue, which will depend on whether you have an electric or gas oven.
What does F9 E1 mean?
If F9 E1 (drain pump system problem – long drain) appears in display, the washer is taking too long to drain water. The drain may extend more than 4.5″ (114 mm) into standpipe. Check plumbing for correct drain hose installation.
How do I fix error code F9?
Clean the door switch
The F9 Error code with the GE oven suggests that the door switch is faulty. Usually, there is nothing serious to be concerned about, and the problem is caused by debris that has become lodged in the door switch.
How do I clear f10 code?
What does E1 and F9 mean on a Maytag washer?
F9 E1 Code in the display:
This error code indicates that drain times are longer than expected, typically over eight (8) minutes.
How do I fix error code CE 108262 9?
PS5 Error code CE-108262-9 Software Issue
Update your console’s firmware to the latest version.