The UE error code sometimes appears because the washer is too full for the control board to redistribute the load during the rebalance routine. In this case, remove some garments and restart the cycle in Rinse/Spin mode. In the future, loosely place items in the basket; don’t pack down the load and add more garments.
How do I fix the UE on my washing machine?
The uE/UE code indicates that the washer is attempting to balance the load, which may be the result of the unit not being leveled correctly or the load itself.
Run rinse and spin cycle without load.
Empty the drum completely.
Power the unit on.
Select the RINSE AND SPIN cycle.
Press start.
How do you fix UE?
The UE Error Code means you have an unbalanced load.
There are 3 easy fixes.
Check the washer legs. All four should rest evenly on the ground with nothing underneath them.
Redistribute the wash.
Try turning it off and on.
What does UE mean on washer?
When an UE error message is displayed on Samsung Washing Machine, it is indicating that the laundry load is unbalanced and has stopped the spin for safety reasons. It is vital to ensure that the load is evenly balanced when using a spin cycle.
How do you fix a UE code on a Kenmore washer? – Related Questions
How do you fix an unbalanced drum washer?
If the washer sits on an uneven surface, its feet will need to be adjusted, or something like a strip of carpet will need to be put under the washer to balance it. Another option is to put rubber vibration absorbers under the washer to balance and reduce shaking when the washer is operating.
Can an unbalanced washer be fixed?
Thankfully, the problem can usually be fixed by simply rearranging your load of washing to make it more balanced or by making sure your washer is sitting level on the floor, but sometimes it may be one of the internal components that are the cause of the problem, which means they will need to be repaired or replaced.
How do you clear the UE code on a Samsung washer?
If your washing machine displays the code “UE”, try redistributing the load by adding or removing items to ensure a more balanced load. Single large or heavy items such as bath mats or large towels are unlikely to spin on their own, so try adding two or three additional towels and then restart the spin cycle.
How do I rebalance my LG washing machine?
Place a level across the top of the washer. Loosen the lock nuts on all four leveling feet, until you can turn the feet with the included wrench. Turn the bolts clockwise to raise the washer, or counterclockwise to lower it. Do this until the bubble on the level stays right in the middle.
How do I balance my Samsung washer?
1 Turn the washing machine off and then on again.
2 Press and hold Prefer Mode or Smart Control for 3 seconds.
Use the Up/Down arrows to select Calibration.
Press OK.
5 Press the Start/Pause button to begin Calibration Mode.
Can an unbalanced washing machine cause damage?
An unbalanced washing machine can experience serious damage during the spin cycle. This is because the drum or the tub of the machine will bang against the inside of the washer. You will end up having to spend a lot more on repairing your machine or replacing it.
How much does it cost to fix an unbalanced washer?
Washing machine repair costs by problem
Problem
Cost range
Leaking
$75 – $200
Won’t drain
$85 – $225
Won’t spin
$120 – $350
Unbalanced drum
$200 – $400
How do you balance a washing machine by yourself?
Leveling a Washing Machine
By placing a level on top of the machine, you can adjust the feet of the washer, not the actual floor, to make the machine level. This means that even if the floor itself is not level, you can compensate by adjusting the machine feet to be just right.
What causes a washing machine to get out of balance?
An out-of-balance condition can result from an unlevel machine, or a worn out tub bearing that allows radial play in the wash basket shaft which causes the entire tub and basket assembly to spin wildly out of control.
What happens if top load washing machine becomes off balance?
Top-loading washers automatically adjust to level. If something has shifted, you can relevel a top-loading washer by tipping the washer forward, then placing it back on the floor. Front-loading washers level by turning a leg to raise or lower it.
What causes a washing machine to shake violently during spin cycle?
If your washing machine is shaking violently, the culprit may be inside: check if the washer is overloaded or if a bulky item is causing it to become unbalanced. If all is well on the inside, it’s also possible that the washer is unlevel or unbalanced due to improper installation or uneven floors.
How do you rebalance a washing machine tub?
How do I know if my washer drum is off balance?
If your washing machine is reaching its spin cycle and that is manifesting in it making loud banging noise, then it is likely that the machine is out of balance in some way. When this happens, the tub of the washer will begin to bang against the sides of the washer, creating the noise.