How do you fix a loose drum on a washing machine?

Is the drum in a washer supposed to be loose?

The drum assembly should move, but not hit the cabinet. The dampers/shock absorbers should restrain it.

Why does my washer drum seem loose?

If your washing machine drum is loose, you will need to check your drum for broken bearings, shock absorbers, or damaged suspension rings and dampening straps. If any of these are damaged, worn, or broken, the parts will need to be replaced.

How do I know if my washing machine drum is broken?

To check, turn the drum back and forth; movement should be smooth and easy with very little resistance or noise. If you can hear or feel grinding then this is confirmation that your washing machine bearings have indeed worn.

How do you fix a loose drum on a washing machine? – Related Questions

Is it worth fixing a washing machine drum?

A relatively new washer may not break down regularly, hence it may be more affordable to repair it. Getting replacement parts for modern machines can be easier than finding components for older models. Washing machine repair is recommended when the repair cost is less than 50 percent of a new machine’s price.

Is it worth replacing washing machine drum?

By replacing your worn-out drum bearings with shiny new ones, you’ll essentially be giving your washing machine a new lease of life. You may find that doing this means you’ll get a few more years out of your machine, and it will freshen it up.

What does a broken washing machine drum sound like?

Noise During Agitation

The most common cause of a washer making a loud noise during the agitation cycle is a worn-out drum bearing or broken drive pulley. These defects usually cause a grinding or rumbling sound when the drum spins.

Can you still use a washing machine if the drum is broken?

There is only one answer to this question, and it is absolutely not. The consequences of trying to use your washing machine after one of your drum paddles breaks could be disastrous!

Can overloading a washing machine break the drum?

For a start, overloading your appliance could damage your machine’s drum and decrease your washer’s efficiency. In the end, clothes won’t come out as clean, either, so a second wash may be necessary.

What does a broken washing machine bearing sound like?

Rumbling, very noisy spin

Most often, this is caused by drum bearing failure. One way of testing is by spinning the drum by hand. If it’s noisy, the bearings will need replacement. The second, and easier way of testing is by trying to lift the drum from just behind the top of the door.

What does a failing bearing sound like?

Squealing & Growling

The classic sounds of a bad wheel bearing are cyclic chirping, squealing and/or growling noise. You can also tell that the sound is related to wheel bearings if it changes in proportion to vehicle speed. The sound can get worse with every turn, or it can disappear momentarily.

What does it cost to replace washing machine bearings?

Washing Machine Bearings Replacement Cost

Expect to pay between $150 and $230 to replace drum bearings, including the cost of labor. Bearings last about 10 years. Call a washer repair contractor near you if it starts making unusual sounds.

Why is my washing machine making a rattling noise when spinning?

If your washing machine makes a loud rumbling or repetitive banging sound, which is particularly bad on a spin cycle, then it is most likely due to loose or worn out drum bearings. It is best to consult an expert on this particular issue, rather than attempt a DIY fix.

How do you check drum bearings on a washing machine?

How do I stop my washing machine from shaking when spinning?

6 Tips to Stop Washing Machine Vibration
  1. Check that your loads are balanced.
  2. Check the the floor and machine are level.
  3. Ensure You Have a Sturdy Floor.
  4. Check Your Stacking Kit.
  5. Purchase Washing Machine Vibration Pads.
  6. Call in Some Reinforcement.

Have my washing machine bearings gone?

If your washing machine is noisy on spin, then this can be a symptom of drum bearing wear. A quick check for wear is to see if the inner drum moves up and down relative to the fixed outer drum. It should only move a small amount. If it moves more than a millimeter or two, it is probably worn bearings.

Why is my washing machine banging and shaking?

If your washing machine is shaking violently, the culprit may be inside: check if the washer is overloaded or if a bulky item is causing it to become unbalanced. If all is well on the inside, it’s also possible that the washer is unlevel or unbalanced due to improper installation or uneven floors.

Can loose change damage a washing machine?

#1) Loose Change

The centrifugal force of a washing machine will aggressively toss loose change around, placing its mechanical components at risk for serious damage. This problem is easily prevented by checking your pockets beforehand.

Leave a Comment