How do I replace the drain hose on my LG washer?

Are all washing machine drain hoses the same size?

All washing machines should use standard sizes and fittings. But there are variances in design across different manufacturers and a few potential problems as discussed in this article. You will always get new fill hoses with a new washing machine.

Do LG washers come with a drain hose?

Yes the drain hose is included with the washer. Just buy new hot and cold water lines. Sorry, there was a problem.

How long is an LG washer drain hose?

The hose is about 20inches to short.

How do I replace the drain hose on my LG washer? – Related Questions

What size is LG washer drain hose?

Drain hose 5214FR3188G carries water from the drain pump to the house drain. Hose is 1 inch in diameter and 60 inches long.

Can a washer drain hose be replaced?

Installing A New Washing Machine Hose. Whether they’re made of black rubber or stainless steel, washer hoses need to be replaced about every three to five years. If it’s been that long, or if the hoses are showing signs of wear, it can be easy to replace them if you follow these simple steps: Turn off the water supply.

How long are washing machine drain hoses?

Washing machines come with standard 1.5 m (4.9 ft) hoses, but you can safely extend them with pipes that are a maximum of 1.2 m (4 ft) long.

What is the proper length of a washing machine drain pipe?

Highlights. The standard washing machine drain size is 2 inches, and the minimum requirement is 1 1/2 inches. Modern washers typically require a larger drain, and you may need a larger drain if it’s connected to your kitchen sink.

How far should a washing machine drain hose be?

For new Top Load washers, the drain hose should be no more than 5″ down into the drain pipe. For Front Load washers, the drain hose should be no more than 7″ down into the drain pipe.

What lengths do washing machine hoses come in?

Washing machine hoses vary in length from about 3 feet to 12 feet. When choosing an appropriate length for a hose, include a few extra inches of slack.

Does a washing machine drain hose need to be elevated?

Elevating A Washing Machine Drain Hose

To be safe, you should always raise the drain hose above the level of the washing machine. This will keep any siphoning to a minimum. You may also take other measures to make sure you receive the best drainage possible.

Can a washing machine discharge hose be too long?

Make sure that the drain hose is not stretched, pinched, crushed, or kinked. Do not install the drain hose with the end lower than 29.5 inches (75 cm) or higher than 96 inches (244 cm) above the bottom of the washer or more than 60 inches (152 cm) away from the washer.

Are all washing machine hoses universal?

A: Yes. They are universal hoses. Washing machines are standardized. Occassionally you will find portable washing machines with different hook-ups, but because they are not standardized they mention the special type connection used.

Does Ace Hardware carry washer hoses?

Ultra Dynamic Products Rubber Washing Machine Hose 3/8 in. D X 4 ft. L – Ace Hardware.

What is the difference between red and blue washing machine hose?

Using the same method, connect the hose to washing machine fittings. The hoses are color coded to match the hot and cold water valves, with red for hot and blue for cold. Turn the water supply valves back on and thoroughly check for any leaks.

How do you fix a leaky washing machine hose?

Can I seal the washing machine drain hose?

While sealing around the discharge hose will prevent gases from escaping the standpipe, it doesn’t allow the necessary airflow into the standpipe during the draining process. This results in overflowing and possible flooding of the home and/or the siphoning of water from the washing machine.

Why is my washing machine drain hose leaking?

Water leaks can occur if the water hose connection between the washer and the wall is disconnected. The hose can loosen due to the constant vibrations from washing machine cycles. If you suspect your leaking washing machine is the result of a loose hose connection, all you have to do to fix it is tighten the hose.

What causes a washing machine hose to leak?

The water supply hose has a gasket on each side. These two gaskets may become loose over time. If water is leaking from the supply hose, you may need to replace the gaskets. Check the connection between any extension hose and the drain hose of your washing machine.

Leave a Comment