How do I fix the F21 error on my Whirlpool washer?
•
F21 Error Code
Is the drain hose kinked?
Is the drain hose frozen?
Is the drain hose clogged?
Is the drain hose more than 96″ (2.4 m) above the floor?
Plug in washer or reconnect power. Re-select cycle and press START. If the problem remains, call for service.
What does F21 mean on a Whirlpool washer?
The Whirlpool washer error code F21 means the washing machine has a “water draining issue”, meaning the drain pump itself, or the drain hose is clogged and the washer is having problems draining the water out. In other words, the washer is taking too long to drain the water out of the tub.
Why is my washing machine flashing F21?
If your Whirlpool washer is showing an F21 error code, this means that your washer is unable to drain properly. This can be caused by a clogged pipe, a faulty drain pump, or something simpler.
How do I force my Whirlpool washer to drain?
Find the “Pause/Cancel” button on the control panel. Press this button twice to drain the washer. Press the “Power” button and rotate the cycle selection knob to “Drain and Spin” to remove the remaining water from the load. Check the washer’s discharge hose if the water fails to drain from the washtub.
How do I fix the F21 error on my Whirlpool washer? – Related Questions
How do you unclog a Whirlpool drain hose?
What causes a Whirlpool washer not to drain or spin?
If your Whirlpool washer is not draining, the drain hose, drain pump, door lock, or lid switch are likely causing the issue. If these components are working correctly, the control panel or timer may be causing the issue. First, there are some simple solutions to check that may solve the issue.
Is there a way to force my washer machine to drain water?
Try the spin cycle
If your machine allows it, try manually setting it to the spin cycle and running it to see if it drains. You may also try restarting the entire wash cycle to see if it works.
How do I manually drain my Whirlpool automatic washing machine?
Turn the knob slowly until water starts coming out.Fill the container, turn the knob off, dump the water into a sink or basin, and repeat until the water has been drained completely. If you have a drain pump filter and tube, unclip the drain tube and unscrew the end cap when you’re ready to release the water.
How do I get water out of my washer that won’t drain?
Follow these steps to drain the water with the drain hose.
Step 1: Turn off the power.
Step 2: Find the drain hose at the back of the washing machine.
Step 3: Set up the bucket and drain hose.
Step 4: Check for and remove all clogs in the drain hose.
Step 5: Check for deeper clogs in the drain or beyond.
How do I manually reset my Whirlpool washer?
Rotate your dial until you have the following three lights illuminated: RINSE, WASH, and STOP.Then turn off your washer and unplug it for ten seconds. When you turn it back on it should be reset. You can run a test load without any clothing to ensure that the reset worked.
Can you reset a washing machine by unplugging it?
Reset your washing machine
What you can do instead is power cycle it: Unplug it (or turn off power at the circuit breaker), wait some time for the electrical charge to clear out of the washer (usually 1 to 5 minutes at most), and then power it up again. This is the closest you can get to a “reset” of the washer.
How do you force a washing machine to reset?
If you see no change, you can try a Master Reset. This will reset all of the onboard componentry and is often successfully used by appliance technicians. Open and close the door of the washing machine 6 times within 12 seconds. Then, run the rinse/spin cycle without clothing to see if your problems are resolved.
What buttons do you press to reset a Whirlpool dishwasher?
Some models require you to shut off the power to the dishwasher either by unplugging it or shutting off the circuit breaker. Others are reset by pressing and holding the Start/Reset button on the control panel, then waiting a few moments before attempting to start a wash cycle.
How do I reset my Whirlpool error code?
Press the Pause or Cancel button twice and the Power button once to clear the code.
Where is reset button on Whirlpool?
How do I reset my Whirlpool control board?
What are the most common problems on a Whirlpool washing machine?
Here are seven of the most common problems on a Whirlpool washing machine and potential fixes for them.