How do I clean the filter on my Maytag washer?

•

The following steps detail how to clean Maytag washing machine filter in front-load models quickly and easily.
  1. Step 1: Open Drain Dispenser Drawer.
  2. Step 2: Drain the Pump Hose.
  3. Step 3: Take Out the Drain Pump Filter.
  4. Step 4: Remove Lint and Debris.
  5. Step 5: Replace the Drain Pump Filter.
  6. Step 6: Secure the Dispenser Drawer.

How do you clean a Maytag top load washer?

Method 1: Top-Load
  1. Set your washer to the hottest and largest setting and start the cycle.
  2. Add 1 quart of bleach to the water and let the water agitate for a minute so that it mixes well.
  3. Lift the machine’s lid and let it sit, full of bleach, for an hour.
  4. After the hour, close the cover and let it run an entire cycle.

What maintenance should be done on a washing machine?

Keep it clean to help your washer run efficiently. Wash the washing machine. Rinse away soap residue and buildup by running store-bought washing machine cleaner, or a solution of hot water, vinegar and baking soda through an empty load. Prevent musty odors and mildew.

What do you use to clean a Maytag washer?

SUPPLIES NEEDED TO CLEAN A WASHER
  1. affresh® tablet1
  2. Liquid chlorine bleach.
  3. Damp cloth.
  4. All-purpose cleaner.

How do I clean the filter on my Maytag washer? – Related Questions

How often should you clean your Maytag washing machine?

It is recommended that you clean your washer approximately once a month to prevent detergent and fabric softener residue from building up. We recommend using the affresh® washer cleaning tablets once a month. affresh® cleaners are available at many retailers. Find one here.

How often should I clean my Maytag washer?

Run the Clean Washer cycle every month to maintain washer freshness. This procedure helps keep odors from developing in your washer. The Clean Washer cycle uses higher water volumes in combination with affresh® washer cleaner or liquid chlorine bleach to thoroughly clean the inside of the washer.

Can you clean Maytag washer with vinegar?

Cleaning Tips

Mix 1/4 cup with the same amount of water and add it to the detergent slot of your washing machine. Then, in the drum of the machine, add two cups of white vinegar, suggests Reviewed.com Laundry. Run a normal load and allow the baking soda and vinegar to work their magic.

What is the best way to deep clean a washing machine?

Fill the drum with a ½ cup of baking soda and a quart of vinegar and run a wash cycle containing just a couple of clean hand towels (many manufacturers don’t recommend running the washer completely empty). Use the hottest water setting, largest load size, and the longest wash cycle.

Can I use vinegar instead of affresh?

As an alternative to a formulated washer tub cleaning product like Affresh, you can clean and sanitize the inside of the tub with a combination of white vinegar and baking soda, or liquid chlorine bleach (be aware that vinegar and bleach should never be used together).

How do you clean a smelly Maytag washer?

Here’s how to clean the interior when your Maytag washer smells like mildew:
  1. Sprinkle ⅓ cup of baking soda inside the empty washer tub and close the door.
  2. Pour 2 cups of white vinegar in the detergent dispenser.
  3. Start a regular wash cycle with hot water and run it to completion.

Why does my Maytag washer smell like sewer?

You use too much detergent

This is ironic, but using too much detergent can also cause your wash machine to smell like a sewer. If you do not use enough water to do your laundry, a lot of detergents would be left after washing.

Why does my Maytag washer smell so bad?

If your Maytag washer smells like rotten eggs, there’s likely a buildup of mildew in the washer tub. Cleaning the tub on a monthly basis, or every 30 wash cycles, can prevent buildup and curb odor. Some washers have a Clean Washer cycle that performs a tub cleaning.

How do I get the rotten smell out of my washing machine?

Baking Soda & Vinegar Wash
  1. Mix ¼ cup of baking soda with ¼ cup of water and add it to your machine’s detergent container.
  2. Use four cups of plain white (not apple cider) vinegar to a top-load machine or two cups to a front-load model.
  3. Pour the vinegar into the drum.
  4. Run a high-temperature cycle.

How do you clean sludge out of a top loader washing machine?

Clean the Washing Machine with Vinegar Again fill the washer with HOT water but this time add one quart of white vinegar. Same routine-set on the longest cycle and let it agitate a few minutes then sit for one hour. After the hour complete the wash and rinse cycle.

Why does my washing not smell fresh after washing?

Over time, components in your washer can become clogged with built-up detergent or fabric softener residue, which can become a playground for bacteria that can cause a sour smell. Regular cleaning of your washing machine can eliminate this issue and set you on the path to better-scented clothes.

Why does my washing machine have a rotten smell?

If your washing machine smells like rotten eggs, there could be a couple of different culprits. Most often, the stench comes from mold or mildew caused by a buildup of soap scum, dirt, or even a trapped sock. Fixing the smell is as simple as doing a quick scrub and running a wash with water and distilled vinegar.

Why does it smell like sewage when I run my washing machine?

The most likely is bacteria growing in your washer because of built-up dirt, mildew and mold, lint, and/or soap. If you don’t regularly clean your washing machine, these things build up on, under, or inside the rubber seal and in the crevices of the drum.

When I turn on my washing machine it smells like rotten eggs?

4 Reasons Your Washing Machine Smells Like Eggs
  • Reason 1 – Something stuck in the door seal.
  • Reason 2 – Clogged drain plug or pump.
  • Reason 3 – Your washing machine is dirty.
  • Reason 4 – The sewer is clogged.

Why does laundry room smell like rotten eggs?

Mold and mildew may be the cause of the rotten egg smell coming from your laundry room. As with any place that has high humidity — mold, mildew, and other fungi are more likely to flourish, particularly in darker, damp places.

How do I clean the filter on my washing machine?

  1. Step 1: Wipe the Filter and Housing. Open the filter housing and wipe away lint and debris using paper towels.
  2. Step 2: Scrub the Filter. Using a soft-bristle brush, such as an old toothbrush or dish brush, scrub the filter to remove lint and debris that has built up on the filter.
  3. Step 3: Run a Short Wash Cycle.

Leave a Comment