Open the dispenser drawer by pulling on the handle at the base of the washer. This will reveal the drain pump filter.
How do I clean the filter on my whirlpool top load washer?
Where is filter on top load washer?
Top Load Washer – Lint / Pump Filters
There are 2 crescent-shaped Fine Mesh plastic lint filters in the bottom of the wash basket under the agitator.
During drain down and spin, the water forces the lint off the bottom of the filters and down the drain.
These filters should never require cleaning or replacement.
How do I know if my washing machine has a filter?
To locate the filter on your washing machine, consult the owner’s manual.
Typically, the filter will be located in one of these places:
In the center agitator.
In the drum’s top lip.
Behind a trap door on the front exterior of the machine.
Near the water pump or at the end of the drainage hose.
Does whirlpool top load washer have a filter? – Related Questions
Where is my Whirlpool washing machine filter?
Usually, it will be on the bottom right of the washing machine, making access rather easy. Of course, your model may be different so you may need to consult the user’s manual or give your washer a quick look over to find it.
Why does my washer not have filters?
It’s possible your washing machine does not have a filter at all. Most newer, high-efficiency washers rely on a filter in the pump that self-cleans, meaning that there’s no need for maintenance on your end.
How do I clean the filter on my top loader washing machine?
Do all washing machines have lint filters?
You washer’s lint trap or lint filter is located within the washing system, however. Depending on the type of washer, mesh lint traps or cleanable filters may be used. High-efficiency washers typically do not have lint traps or filters, however; they rely on built-in pump filters that self-clean.
Where is the laundry machine filter?
Typically, the filter of a washing machine is located in one of the following areas: Inside the drum, somewhere at the top (along the rim) Beneath a cover in the middle of the drum (underneath the agitator) On the front or at the back of the appliance, concealed by a hatch.
Where is the lint trap on a washing machine?
There’s a good chance you’ll find the filter on the rim of the washer drum. To check if this is where your washer’s lint trap is located, open the appliance’s lid and run your fingers along the rim of the drum. If your fingers brush against a screen, you’ve found the filter.
How do you clean the lint trap on a top load washer?
Here’s how to clean it:
If the screen is removable, soak it in hot water for 10 minutes to clear away residue.
If the filter is secured in place, clean lint from it with a soft brush or paper towel.
If the trap is disposable, replace it when it becomes clogged.
How do I clean the lint out of my Whirlpool washing machine?
How to Clean? You may remove the filter by pulling out the drawer located at the front base of the whirlpool washer. Here you will have access to the drain pump filter, and you may remove the large clumps of lint.
How do you tell if your lint trap is clogged?
The Warning Signs and Dangers of Clogged Dryer Vents
It takes longer than usual to dry your clothes.
You notice a burning smell.
Your clothes are hot to the touch at the end of a load.
You can see lint or debris in the dryer hose or around the outside dryer flap.
You haven’t cleaned out your vents in over a year.
What happens if you don’t empty the lint trap?
Your dryer’s exhaust system can get clogged with lint, which will keep your dryer from functioning properly. As a result, the dryer will not only take longer to dry clothes, it will also increase your electric bill and create a fire risk.
Does lint from washer clogging drain?
Just like a lint trap in your dryer, the one in your washing machine is designed to collect the lint from your laundry that has the potential to clog up your drain or septic line over time. Neglecting your lint trap has the potential to lead to plumbing problems, costly repairs or even water contamination.
Will clothes dry if lint trap is full?
Our clothes shed tiny pieces of fabric fiber with each drying cycle. The dryer’s hot air blows these fibers around and into the lint screen. When the screen is full of lint it can prevent the proper circulation of hot air, leading to longer drying times.
How often should you empty lint trap?
The recommendations you’ve heard are correct – you should clean the lint filter between every batch of clothes. Get into the habit of removing lint from the screen, either before or after every batch. Many new dryers will automatically remind you to check the lint filter before starting up.
How do I know if my dryer vent needs cleaning?
8 Signs You Need to Clean Your Dryer Vent
Clothes take longer than normal to dry.
Clothes are unusually hot to the touch.
The room is warmer than normal when the dryer is running.