Draining a washing machine into a floor drain might be okay if it’s properly done and if the floor drain is not connected to a storm sewer. Any connection between the washer and the floor drain should be through appropriate plumbing, so the water is not splashing onto the floor.
How do you hook up a washing machine to a floor drain?
Floor Standpipes and Wall Drains
Unplug your washer from the wall outlet. Reach behind the washer and grab your drain hose.
Thread the end of the washer drain hose through one of the rings on the end of a U-shaped hose form.
Insert the end of the hose and the hose form into the stand pipe or wall drain pipe.
Do I need a floor drain in my laundry room?
The 2017 IRC code does not specifically require floor drains to be installed in laundry rooms, but buildings often include them to provide for emergency drainage or to help with other drainage needs (e.g., relief valves, water heater drainage, condensate drainage, etc.).
Does a washing machine drain need to be elevated?
Elevating A Washing Machine Drain Hose
To be safe, you should always raise the drain hose above the level of the washing machine. This will keep any siphoning to a minimum. You may also take other measures to make sure you receive the best drainage possible.
Can you use a floor drain for a washing machine? – Related Questions
What is code for washing machine drain?
According to the Universal Plumbing Code, the standard drain size for a washing machine is 2 inches. The absolute minimum should be about 1 1/2 inches. However, keep in mind that wash load capacities can vary by up to 400% or more depending on the model.
Can a washing machine drain be too low?
The washer drain hose is a 1-1/4″ O.D. (outside diameter). To be confident that no siphoning of water will take place, the drain plumbing must be a minimum of 30″ high for Top Load washers. Siphoning means the washer will fill and drain at the same time. This happens when the drain height is too low.
How high does a washing machine drain box need to be?
Once you’ve selected the right washing machine outlet box for your situation, it should be installed at a height where the flood level rim (or the top of the drainage outlet) is 32” to 34” above the finished floor.
How high should stand pipe be for washer drain?
The standpipe for the clothes washer must be trapped. The standpipe height should be at least 18 inches (457 mm) and no more than 42 inches above the trap weir.
How high should a washing machine standpipe be?
Laundry standpipes must be tall enough to extend past the washing machine’s overflow line—typically 30-36” in height, or 18”-30” above the trap.
What is code for washing machine standpipe?
The standpipe shall extend not less than 30 inches (762 mm) above the weir of the standpipe trap and shall extend above the flood level rim of the laundry tray. The outlet of the laundry tray shall not be greater than 30 inches (762 mm) horizontal distance from the side of the standpipe.
Does a washing machine drain line need to be vented?
All plumbing fixtures—including washing machines—must be vented. Improperly vented drains can be sluggish and noisy, and can emit hazardous fumes. Properly vented drains allow the P-trap to do its job: prevent sewer gases from escaping into your home.
Can a washer and toilet share the same drain?
Your drains are connected – One of the main reasons your toilet gurgles when your washer machine drains is because your washer machine is connected to the toilet drain. This isn’t uncommon. Your washing machine might have been placed in between your toilet and sewer stack.
Does a washing machine standpipe need a trap?
If they omit the trap and vent, it’s a mistake that can cause problems on two counts. The lack of a P-trap exposes the area to sewer fumes and the lack of venting will cause the drain to run sluggishly and overflow. Washers, like all fixtures, need a trap.
How do you drain a washing machine without going everywhere?
If you have a drain pump filter only, place the shallow container up against the machine, directly under the filter, to catch the water. Turn the knob slowly until water starts coming out. Fill the container, turn the knob off, dump the water into a sink or basin, and repeat until the water has been drained completely.
How should a washing machine waste be plumbed in?
How far can a washing machine be from the drain?
So, how far away can you fit a washing machine drain? You can fit a washing machine drain a maximum of 2.7 m (9 ft) from your washing machine. Washing machines come with standard 1.5 m (4.9 ft) hoses, but you can safely extend them with pipes that are a maximum of 1.2 m (4 ft) long.
Where is the right place to put washing machine in the house?
The bathroom is the obvious choice for the washing machine – the plumbing and electrical points are already in place. If you have only the washer, put it under the washbasin counter on one side – this way you still have place for drawers.
Does washing machine have to be next to sink?
Some manufacturers recommend a standpipe, and some water companies insist on it. The easiest solution though, is to put your machine next to a sink and change your sink trap to a washing machine trap – which has an inlet for the waste hose above the trap.