Drain pans aren’t a requirement for your washer, but they are an inexpensive and simple way of protecting your home by catching small leaks and reducing the amount of water damage from broken hoses. If your laundry room is upstairs, a drain pan is recommended to protect against leaks that can seep into the rooms below.
Does a washing machine drain line need to be vented?
All plumbing fixtures—including washing machines—must be vented. Improperly vented drains can be sluggish and noisy, and can emit hazardous fumes. Properly vented drains allow the P-trap to do its job: prevent sewer gases from escaping into your home.
Where should a washing machine drain to?
What is code for washing machine standpipe?
The standpipe shall extend not less than 30 inches (762 mm) above the weir of the standpipe trap and shall extend above the flood level rim of the laundry tray. The outlet of the laundry tray shall not be greater than 30 inches (762 mm) horizontal distance from the side of the standpipe.
Are washing machine drain pans required by code? – Related Questions
Can a washer and toilet share the same drain?
Your drains are connected – One of the main reasons your toilet gurgles when your washer machine drains is because your washer machine is connected to the toilet drain. This isn’t uncommon. Your washing machine might have been placed in between your toilet and sewer stack.
How high should drain pipe be for washing machine?
Whirlpool recommends a minimum of 39” above the floor, and GE has a 30” minimum, except that GE allows the top of the drain pipe opening to be lower if you secure the hose to the back of the machine near the top at a place the manufacturer indicates using a plastic “anti-siphon clip” Both manufacturers have a maximum
Can a washing machine drain into 1 1 2 pipe?
Drainage Problems
To drain water properly, a pipe connecting your washing machine and the sewage system must be at least 1-1/2 inches in diameter. Many building codes require you to use pipes that are 2 inches or larger.
How far should the drain hose go into the standpipe?
For new Top Load washers, the drain hose should be no more than 5″ down into the drain pipe.For Front Load washers, the drain hose should be no more than 7″ down into the drain pipe.
Where do you connect standpipe?
National Fire Protection Association (NFPA) 14, Standard for the Installation of Standpipes and Hose Systems, requires that all areas of the building be within 200 feet of a standpipe outlet in a sprinklered building. In non-sprinklered buildings, the distance is 130 feet.
Does a washing machine standpipe need a trap?
If they omit the trap and vent, it’s a mistake that can cause problems on two counts. The lack of a P-trap exposes the area to sewer fumes and the lack of venting will cause the drain to run sluggishly and overflow. Washers, like all fixtures, need a trap.
How tall does a washer standpipe need to be?
The standpipe for the clothes washer must be trapped. The standpipe height should be at least 18 inches (457 mm) and no more than 42 inches above the trap weir.
Can a washing machine and sink share a drain?
A washer and a sink can share a drain. However, this setup is not recommended. The washer will constantly put water into the drain, while the sink will constantly take water out. Over time, this will cause a build-up of debris in the pipe and eventually lead to a clog.
Can a washer and shower share the same drain?
You can tie in a shower and tub drain to your washing machine drain as long as there is a vented pipe tied into the drain to keep the flow moving along fluidly.
Does washing machine need to be next to sink?
Some manufacturers recommend a standpipe, and some water companies insist on it. The easiest solution though, is to put your machine next to a sink and change your sink trap to a washing machine trap – which has an inlet for the waste hose above the trap.
Do laundry rooms need a floor drain?
Floor Drain
The 2017 IRC code does not specifically require floor drains to be installed in laundry rooms, but buildings often include them to provide for emergency drainage or to help with other drainage needs (e.g., relief valves, water heater drainage, condensate drainage, etc.).
How do you drain a washing machine without going everywhere?
If you have a drain pump filter only, place the shallow container up against the machine, directly under the filter, to catch the water. Turn the knob slowly until water starts coming out. Fill the container, turn the knob off, dump the water into a sink or basin, and repeat until the water has been drained completely.
Can I drain my washing machine water into the garden?
Household wastewater from washing machines, bathroom sinks, showers, and bathtubs is considered “gray” because it is only lightly soiled and poses a minimal health risk. As long as you’re only putting biodegradable products down the drain, graywater is perfectly safe for irrigating plants.
Does a washing machine drain into sewer?
Wastewater from your washing machine and dishwasher may either go to your septic tank and/or cesspool or to a separate disposal system called a dry well. This wastewater can be problematic due to its high concentrations of soaps and detergents, grease and paper.
How do I drain my washing machine to my kitchen sink?
If you do not have designated plumbing for your washing machine, you can hook it up to a sink instead.
Use a sink aerator thread to hose connection adapter to attach the water supply hose to the sink faucet.
Connect the other end of the water supply hose to the cold-water connection on the back of the washing machine.