What do I do if my Whirlpool washer is off balance?
•
Check that the machine is level across the front, back and sides. A machine that is not level will rock during the spin cycle and cause the machine to be off balance. All four legs should be in firm contact with a solid floor. A carpeted surface can throw this balance off.
Why is my Whirlpool washer shaking violently?
Why is my washing machine shaking? If you’ve noticed your washer shaking a lot, the problem could be an overloaded tub, improper installation or leveling issues. During spin cycles, shaking can usually be attributed to an unbalanced washer.
Can an unbalanced washer be fixed?
If you determine that the washer is unbalanced, the washer’s feet can be adjusted to balance the washer. Depending on the type of washer, it may have feet at the back that self-adjust when the front feet are adjusted.
How do I fix my washing machine that is off balance?
If something has shifted, you can relevel a top-loading washer by tipping the washer forward, then placing it back on the floor. Front-loading washers level by turning a leg to raise or lower it. You may need to open the front access panel to loosen the lock nuts that control the legs.
What do I do if my Whirlpool washer is off balance? – Related Questions
What causes a washer to go off balance?
An out-of-balance condition can result from an unlevel machine, or a worn out tub bearing that allows radial play in the wash basket shaft which causes the entire tub and basket assembly to spin wildly out of control.
What causes a washing machine to shake violently during spin cycle?
If your washing machine is shaking violently, the culprit may be inside: check if the washer is overloaded or if a bulky item is causing it to become unbalanced. If all is well on the inside, it’s also possible that the washer is unlevel or unbalanced due to improper installation or uneven floors.
How do you balance a washing machine by yourself?
Leveling a Washing Machine
By placing a level on top of the machine, you can adjust the feet of the washer, not the actual floor, to make the machine level. This means that even if the floor itself is not level, you can compensate by adjusting the machine feet to be just right.
How much does it cost to fix an unbalanced washing machine?
Washing machine repair costs by problem
Problem
Cost range
Leaking
$75 – $200
Won’t drain
$85 – $225
Won’t spin
$120 – $350
Unbalanced drum
$200 – $400
Why does my washer moves across the floor?
If the feet are not level or if the floor is uneven, then the washer will wobble. When a washer wobbles, it tends to walk. Walking is the simple result of centrifugal force that is unevenly distributed. Uneven legs can cause the feet to ‘skitter’ and pull the machine across the floor.
How do I know if my washer drum is off balance?
If the washing machine is not balanced then it will shake violently during a spin cycle. This will cause water to spill on the floor. You should redistribute the load to solve this issue if the cause is due to too many clothes on a single side of the washer.
How do you reset a washing machine drum?
Can an unbalanced washing machine cause damage?
An unbalanced washing machine can experience serious damage during the spin cycle. This is because the drum or the tub of the machine will bang against the inside of the washer. You will end up having to spend a lot more on repairing your machine or replacing it.
How do I stop my washing machine from shaking when spinning?
6 Tips to Stop Washing Machine Vibration
Check that your loads are balanced.
Check the the floor and machine are level.
Ensure You Have a Sturdy Floor.
Check Your Stacking Kit.
Purchase Washing Machine Vibration Pads.
Call in Some Reinforcement.
How do you fix a washer that shakes and moves?
What can I put under my washer to keep it from moving?
Place nonslip pads under the feet of your washing machine so that it stops moving or “walking” when it runs. You can purchase commercially produced pads that are made of a special material that grips the floor while also protecting it against scratches.
Do washer vibration pads work?
Several companies sell anti-vibration pads that slip under the washer feet. Consumer Reports magazine found that they did little good. However, a three-inch-deep platform under the entire washer, known as the Steadywash, did reduce vibrations into the floor, which is your issue.
Should I put a tray under my washer?
Drain pans aren’t a requirement for your washer, but they are an inexpensive and simple way of protecting your home by catching small leaks and reducing the amount of water damage from broken hoses. If your laundry room is upstairs, a drain pan is recommended to protect against leaks that can seep into the rooms below.