Standard washer and dryer sizes are generally 27 inches wide, 39 inches tall and 32 to 34 inches deep for front load units. Whereas, top load washers and dryers are typically 27 inches wide, 42 to 44 inches tall and less deep with depths of 27 to 28 inches.
What height should a dryer outlet be?
Tips for Installing a Dryer Outlet
A height of about 30 to 36 inches from the floor usually suffices to keeps the plug accessible while hiding it from view behind the dryer. Orient the outlet properly: Orient the outlet so the L-shaped (neutral) slot is at the bottom.
How tall should a washing machine standpipe be?
The standpipe for the clothes washer must be trapped. The standpipe height should be at least 18 inches (457 mm) and no more than 42 inches above the trap weir.
Does a washing machine drain need to be elevated?
Elevating A Washing Machine Drain Hose
To be safe, you should always raise the drain hose above the level of the washing machine. This will keep any siphoning to a minimum. You may also take other measures to make sure you receive the best drainage possible.
What is the height of a washer and dryer box? – Related Questions
What is code for washing machine drain?
According to the Universal Plumbing Code, the standard drain size for a washing machine is 2 inches. The absolute minimum should be about 1 1/2 inches.
Where should a washer outlet be placed?
Electrical hookups for washers and dryers should be placed within 6 feet of the unit. While a minimum height for outlets in a home may very, depending on local building codes, for convenience both outlets should be placed between 34 and 36 inches high.
Can a washing machine drain be too low?
Proper Standpipe Height
Placing your standpipe too low or too high can cause backflow and overflow. A standpipe that is too low is prone to overflowing from the standpipe itself, while a standpipe that is too high makes the washing machine have to work harder to pump drained water to the standpipe.
Can a washing machine be raised off the ground?
A laundry riser, in case you weren’t aware, is a platform that lifts washing machines and dryers off the floor. It’s especially great for front loaders, as it raises the drum to allow for easier access—perfect for the elderly and pregnant.
How should a washer drain be set up?
What is code for washing machine standpipe?
The standpipe shall extend not less than 30 inches (762 mm) above the weir of the standpipe trap and shall extend above the flood level rim of the laundry tray. The outlet of the laundry tray shall not be greater than 30 inches (762 mm) horizontal distance from the side of the standpipe.
What is the minimum height of a standpipe?
Also, the 18-inch minimum height of the standpipe intends to prevent the possibility of the clothes washer’s pumped waste from overflowing the standpipe.
What is the minimum height for a standpipe for a washing machine drain?
The standpipe shall extend not less than 30 inches (732 mm) above the weir of the standpipe trap and shall extend above the flood level rim of the laundry tray. The outlet of the laundry tray shall not be greater than 30 inches (762 mm) horizontal distance from the side of the standpipe.
What is the maximum height of a standpipe?
Standpipes shall be 2 inches (51 mm) in diameter and not less than 18 inches (762 mm) or more than 48 inches (1219 mm) in height as measured from the crown weir. The standpipe shall extend 34 inches (864 mm) minimum above the base of the clothes washer unless recommended otherwise by the manufacturer.
How high can a washer drain be?
Generally, the maximum height is around 39″ (99 cm). Newer washers often have a drain hose permanently attached, which is designed to make drain installation fool proof.
Does a washing machine standpipe need to be vented?
All plumbing fixtures—including washing machines—must be vented. Improperly vented drains can be sluggish and noisy, and can emit hazardous fumes. Properly vented drains allow the P-trap to do its job: prevent sewer gases from escaping into your home.
Does a washing machine need a standpipe?
If you are planning to install a washing machine, then you need to ensure proper plumbing for your washer. That means having suitable standpipe plumbing for the drainage hose.
Does a washing machine receptacle have to be dedicated?
Washers and dryers have powerful motors heating elements, making a dedicated circuit necessary to prevent overloading the electrical system. Generally, any equipment that runs on 220-volt power will need its own circuit.
Can a washer and toilet share the same drain?
Your drains are connected – One of the main reasons your toilet gurgles when your washer machine drains is because your washer machine is connected to the toilet drain. This isn’t uncommon. Your washing machine might have been placed in between your toilet and sewer stack.